2002 Bugatti Veyron - Answered Questions & Fixed issues
Bugatti don't turn on
Try to contact the dealership and your ignition might be at fault. Do you hear the starter? If not, there is a problem with the wiring.
I have a problem in my Hyster P1.6 when I stard the code appears AL03
Error AL03 can have different meanings depending on the exact Hyster P1.6 model and controller, so the first step is to identify the truck's serial number or year of manufacture. It would also help to know whether the error appears immediately when you power it on or only when you try to drive or lift. If you can share those details, it will be much easier to identify the cause and suggest the correct troubleshooting steps.
8/3/2026 8:42:00 PM •
Cars & Trucks
•
Answered
on Aug 03, 2026
•
105 views
My polo classic 1.6 1998 model. Petrol pump don't switch on only when connected to a live point
the hot wiring of fuel pump relay fails.
so 2 causes, fuel pump dead or the 2 wires to it are bad (rusty)
2nd wire is ground at pump. can be bad.
or not doing the test correctly at the FP relay.?
doing the hot wiring wrong invites blowing up a very expensive
ECU/ECM/PCM
connecting to a live point? = hotwiring. (jumped)
to be safer unplug the ECU. if hot wiring is in the PLAN.
7/28/2026 12:55:28 PM •
Cars & Trucks
•
Answered
on Jul 28, 2026
•
82 views
Starting problm 2002holden astra city 1.8
no holdens in USA
no cars, no books no parts.
zero.
will not crank fast
or cranks fast but will not start. what does problem mean?
10 causes of no crank
5o causes of cranks but wont start.
top cause is battery no good after 5-7 years old. useless.
7/26/2026 6:23:08 PM •
Cars & Trucks
•
Answered
on Jul 26, 2026
•
23 views
Put new motor in but gutless cant even drive it
no car told maker,model , year.
not told all parts replaced or touched.
new motor using the old sensors or new motor with wrong sensors.
does it burn GAS?
my 2 guesses (of 50 possible)
all EFI sensors not plugged in, and all injectors
or the new engine is bad, and fails compression tests.
sadly no car told
7/26/2026 6:20:39 PM •
Cars & Trucks
•
Answered
on Jul 26, 2026
•
23 views
OEM PART NO. FOR 78 GL1000 SPRING LOADED TENSIONER
posted honda (no maker told) GL1000 motor cycle to cars
well post top motorcycles
and tell what this spring is part off. ? carb set x4? or what?
or name what you are touching first. on the bike.
1978 is old, and parts are real hard to find new if at all but used parts are seen on ebay, ive done that on may bikes Ive restored
back to 1975 CB750.
if lucky you can google and find GL1000 parts catalog from honda that year, even scanned to PDF , just google and get lucky.
7/26/2026 6:01:27 PM •
Cars & Trucks
•
Answered
on Jul 26, 2026
•
21 views
Head light switch got to hot and melted the plastic . Keeps blowing the fuse. Headlights just go off at night and this is the 2nd switch I've replaced.. I need the working diagram so I can put the wires in the correct spot.
no car told at all, no clues year ,a maker model, and country
head lamp laws are no the same in all countries.
s this , Tungsten lamp, Halogen, HID or what? same LED upgrade?
sounds to me like using the wrong blubs in this car.
only use OEM lamps. per the glove box users guide.
the switch blows if too much current flows, called OVERLOADED.
so wires shorted, or wrong bulbs put in, is my call blind.
I can not see or guess what car this is.
7/26/2026 5:57:08 PM •
Cars & Trucks
•
Answered
on Jul 26, 2026
•
27 views
I need all the talk settings for 2005 model 1.4 petrol tatta indica, cilinder head bolt, flywheel, main-, and beacan settings and the inlead and outlead clearings. Please it is eargent
no tata in USA
no cars, books ,parts, zero.
buy the service manual at TATA in your country
or google lies, rebuilding engines using internet rumors is fail.
so get the real book and read that, not rumors. on the net.
7/26/2026 5:05:08 PM •
Cars & Trucks
•
Answered
on Jul 26, 2026
•
24 views
Mercedes benz w211 270 cdi timing marks
no year car the books are by year. 2003 to 2009
the E270? yes model E.
not told timing the cam or timing the diesel pump. or both.
we can not see how the tear down ended.
blind.
here is the 2003 book (I rolled the dice for you)
is this car in UK or Europe we are USA
no job told, as in timing what, (we know there is no spark)
so cam and or pump.
ok not pump this case
https://mbworld.org/forums/w211-amg/925619-cam-timing-question.html
first google hit find free answers,
cam;
not wanting to buy the real SM service manual
watch the free videos, one of many, watch.
https://www.youtube.com/watch?v=64XUt6B9KW8
7/26/2026 4:35:32 PM •
Cars & Trucks
•
Answered
on Jul 26, 2026
•
264 views
Mercedes-Benz ml 320cdi error code 2028-004 . what need to be replaced
NO problem told just a HUNT.
is engine dead or what? stalls, misfire, ho power, what?
or just CEL lamp glows only., no other symptoms?
NO no year told, now that is a huge challenge. that.
2005 to 2008 is this true, must I guess?
the V6 engine,
the W164 engine,????? use the real name of the engine is best.
The Diesel it is. CDI, comm rail diesel injected.
not this no scan tool error.you meant P2028 (P= power train)
you double posted this and the other shows
my merc ml 320cdi gives error codes 2028-004 and 2270-004 and 0190-002.
where did you see this error not in real shop with real scan tools
2028
[4] Pump current (G3/2 (O2 sensor upstream of KAT)) of oxygen sensor: Battery severely discharged/ faulty
cranking with dead car battery can create
0190
Check component B4/6 (Rail pressure sensor).: The signal voltage is too low.
i can not find 2270 in the book
7/26/2026 4:11:51 PM •
Cars & Trucks
•
Answered
on Jul 26, 2026
•
306 views
HOW TO KHOWN MY FUEL INJECTORS OF HUNDAI GETZ 1.3 2006 MODEL ARE BAD
no Hyundai Getz in the USA at all, no cars, no parts no books on it. at all. best.
the answer is simple (in the mind) not in practice
if the engine is good? compression and vacuum is steady
1.3 is gas/petrol engine so spark must be good first.
cant burn fuel with dead spark or if weak or misfiring it fails.
if all EFI and OBD2 scans show good then get the injector clean in a pro injector shop for $20 USD.each. 17 EUro cash.
they clean them (ultrasonic) and flow test them .
other tests. on injectors
we test rail pressure first. if low this is the problem.!! first it first !
then injector leak down test, if one fails it leaks.
there is an injector balance test shown in most service manuals
and if fails you have bad injectors. (clogged or leaking)
if engine power is weak there are 1 to 50 causes and only 1 of those is injectors, see? we do the tests and prove it.
using tools you do not have.
7/26/2026 3:56:35 PM •
Cars & Trucks
•
Answered
on Jul 26, 2026
•
26 views
Hi t how do i use the esi for diagrams cause i cant find the telefunken diagram in question. pls help me.
no car told year make model
is that radio stock OEM for you car, day one installed new
or added later. no radio model told so is impossible to guess.
vast exist.
AI tells me this
ESI refers to Ego Systems, Inc., a company that was involved in audio products and later became part of ESI Audiotechnik GmbH
or this.
ESI means EDITION SPORT INJECTION
ESI means ELECTRONIC SEQUENTIAL INJECTION
ESI means ELECTRONIC SERVICE INFORMATION
ESI means ELECTRONIC SPARK IGNITION
ESI means ELECTRONIC SPORT INJECTION
ESI means ENGINE SYSTEM INFORMATION
ESI means ENHANCED SPARK IGNITED
ESI means EUROPEAN SPORTS INJECTION
ESI means EXTENDED SERVICE INTERVAL
7/26/2026 3:47:15 PM •
Cars & Trucks
•
Answered
on Jul 26, 2026
•
24 views
Not finding what you are looking for?
