Beyond Clear Transparent Silicone Skin Cover Case Cell Phone Protector for Samsung A897 Mythic - Page 2 - Answered Questions & Fixed issues
How do I change the font size for incoming messages on an Oppo AX5 please? It does not respond to the font bar in the settings.
To change the font size for incoming messages on your Oppo AX5:
1. **Use System Font Settings:**
- Go to **Settings ? Display & Brightness ? Font Size**.
- Adjust the slider to increase or decrease font size. This affects system-wide text, including messages.
2. **Check Messaging App Settings:**
- Open the **Messages** app.
- Tap the **three-dot menu ? Settings ? Text Size** (if available) and adjust.
3. **If changes don't apply:**
- Restart your phone after changing font size.
- Make sure your **Messages app is updated** via Google Play Store.
4. **Alternative:**
- Install a third-party messaging app like **Textra** or **Signal**, which lets you set font size independently of system settings.
These steps should let you control the font size for your messages.
3/8/2026 8:29:57 PM •
Cell Phones
•
Answered
on Mar 08, 2026
•
101 views
Activate my phone
To activate your phone, follow these general steps:
1. **Insert SIM card:**
- Make sure your SIM card is properly inserted.
2. **Charge your phone:**
- Fully charge the phone before activation.
3. **Turn on the phone:**
- Press and hold the power button until the device boots.
4. **Follow on-screen setup:**
- Choose language, connect to Wi-Fi (if required), and log in to your Google/Apple account.
5. **Carrier activation (if needed):**
- Some phones require activation with your mobile carrier. Contact your carrier if activation doesn't complete automatically.
6. **Restart your phone:**
- If it still isn't activated, restart the phone and try again.
After these steps, your phone should be activated and ready to use.
3/8/2026 8:28:58 PM •
Cell Phones
•
Answered
on Mar 08, 2026
•
28 views
How come my songs keep pausing and I have to un pause them to play again on my audiomack app just start happening all of a sudden.
If your songs keep pausing in the Audiomack app, it may be caused by app glitches, internet issues, or phone settings. Try these steps:
1. Restart your phone to refresh the system and apps.
2. Check your internet connection.
- Audiomack needs a stable Wi?Fi or mobile data connection for streaming.
3. Clear the Audiomack app cache.
- Go to Settings ? Apps ? Audiomack ? Storage ? Clear Cache.
4. Update the Audiomack app from the Google Play Store or App Store.
- An outdated version may cause playback problems.
5. Disable battery optimization for the app.
- Go to Settings ? Battery ? App management and allow Audiomack to run in the background.
After trying these steps, open Audiomack again and check if the music plays without pausing.
3/8/2026 8:26:18 PM •
Cell Phones
•
Answered
on Mar 08, 2026
•
28 views
How change I fix "INACTIVE ERR"
If you are seeing "INACTIVE ERR" on your device, it usually indicates that the service, SIM, or account is inactive. Here's how to fix it:
1. **Check SIM/Service Status:**
- Make sure your SIM card is active and inserted correctly.
- If it's a prepaid SIM, ensure it has enough balance or is not expired.
- Contact your mobile carrier to confirm that your line is active.
2. **Restart Your Device:**
- Turn off your phone.
- Remove and reinsert the SIM card.
- Turn the device back on.
3. **Network Settings Reset:**
- Go to **Settings ? System ? Reset ? Reset Network Settings** (Android) or **Settings ? General ? Reset ? Reset Network Settings** (iPhone).
- This clears any network conflicts that might cause the "INACTIVE ERR".
4. **Update Device Software:**
- Go to **Settings ? System ? Software Update**.
- Install any available updates. Some "INACTIVE ERR" issues can be fixed by software patches.
5. **Test with Another SIM (Optional):**
- Insert a different active SIM into the device. If it works, your original SIM may be faulty.
If none of these steps work, contact your carrier for further assistance-they can reactivate your line or provide a replacement SIM.
3/8/2026 8:24:47 PM •
Cell Phones
•
Answered
on Mar 08, 2026
•
32 views
How to fix a display in the center of a mecer jm777 monitor
If your Mecer JM777 monitor display is not centered, follow these steps to fix it:
1. **Check the Monitor Menu Settings:**
- Press the **Menu** button on your monitor.
- Navigate to **Picture ? Position** (or similar option).
- Adjust **Horizontal** and **Vertical** position until the display is centered.
2. **Adjust Resolution on Your Computer:**
- On Windows: Right-click the desktop ? Display settings ? Advanced display settings ? Ensure the resolution matches the monitor's native resolution (usually 1920x1080 or 1366x768 for JM777).
- On Mac: System Preferences ? Displays ? Set the resolution to **Default for display**.
3. **Update Graphics Driver:**
- Ensure your graphics card drivers are up to date. Old drivers may misalign the screen.
4. **Check Cable Connection:**
- Make sure the VGA/HDMI/DVI cable is securely connected.
- Try a different cable if possible.
5. **Factory Reset Monitor:**
- Access the monitor menu ? **Settings ? Factory Reset**.
- This restores default positioning and often fixes centering issues.
After these steps, your display should be correctly centered on the screen.
4/22/2026 10:13:02 AM •
Cell Phones
•
Answered
on Apr 22, 2026
•
132 views
Comment connecter mon iPhone?
To connect your iPhone to another device (like Wi-Fi, Bluetooth, or computer), follow these steps:
1. **Connect to Wi-Fi:**
- Go to **Settings ? Wi-Fi**.
- Turn Wi-Fi on and select the network you want to join.
- Enter the password if required.
2. **Pair with Bluetooth Devices:**
- Go to **Settings ? Bluetooth**.
- Turn Bluetooth on.
- Put your other device in pairing mode and select it from the list on your iPhone.
3. **Connect to Computer (for syncing or charging):**
- Use a **Lightning cable** to connect your iPhone to your computer.
- Open **iTunes** (Windows) or **Finder** (Mac) to sync or backup your iPhone.
4. **Connect to Car or Audio System:**
- Use Bluetooth or USB depending on your car's system.
- Refer to the car/audio system manual for iPhone pairing instructions.
After following these steps, your iPhone should be successfully connected to the desired device.
3/8/2026 8:23:07 PM •
Cell Phones
•
Answered
on Mar 08, 2026
•
37 views
I have a J7PRIME when I use messages I receive delivery notifications. When I'm texting it says delivered but a few minutes later it doesn't say if it was delivered. What would cause this
If your Samsung J7?Prime shows "Delivered" briefly but then the delivery notification disappears, it's usually due to how your messaging app handles delivery reports or how the network delivers them. Try the following:
1. **Check Delivery Report Settings:**
- Open your **Messages app**.
- Go to **Settings ? More settings ? Text messages**.
- Make sure **"Delivery reports"** is enabled.
2. **Network/Carrier Support:**
- Not all carriers support delivery reports for every message or network type (GSM/CDMA).
- If your carrier doesn't support delivery reports, the message may initially show "Delivered" locally but then clear the status.
3. **Try a Different Messaging App:**
- Download and install a third?party SMS app (e.g., Google Messages).
- Enable delivery reports there and check if the status stays visible.
4. **Restart Your Phone:**
- A simple restart can refresh your messaging service and network connection, which may fix temporary glitches.
If delivery reports still disappear, it likely means your carrier doesn't send persistent delivery confirmations. Enabling delivery reports in a different messaging app often helps reveal the true delivery status.
3/8/2026 8:13:12 PM •
Cell Phones
•
Answered
on Mar 08, 2026
•
39 views
I need allegheny 24 v battry for my set where c an i buy one
You can buy a 24?V
Allegheny battery for your set using the following methods:
- Official Allegheny Dealers:
- Check the Allegheny official website or contact their support to find a list of authorized dealers near you.
- Authorized dealers will sell the correct battery model and can help with compatibility.
- Online Stores:
- Search on major online marketplaces like Amazon, eBay, Flipkart, or local electronics stores.
- Use keywords like "Allegheny 24?V battery" or the exact model number of your set to find the right product.
- Local Electronics & Battery Shops:
- Visit nearby electronics or battery specialty stores with your current battery or device model.
- They can help you find the correct 24?V replacement battery or order it for you.
- Contact the Manufacturer:
- If you're unsure about the exact battery model, contact the device manufacturer or Allegheny's customer support; they can tell you the exact battery part number and where to buy it.
Tip: Always check the voltage (24?V), size, and connector type before buying to make sure the battery fits your set.
3/8/2026 8:11:21 PM •
Cell Phones
•
Answered
on Mar 08, 2026
•
23 views
Just purchased, downloaded apps. When the power button it hit the locked screen comes up but wont unlock. Respnds to touch but wont open
It appears your phone's screen or software is not responding. Let's try the following steps:
1. **Force Restart / Soft Reset:**
- Press and hold the **Power + Volume Down** buttons together for **10-15 seconds** until the phone restarts.
- This usually fixes minor freezes without affecting your data.
2. **Check for Screen Problems:**
- Ensure your screen is clean and free from any cover.
- If using a screen protector or cover, gently remove it and check if touch works.
3. **Safe Mode (Optional):**
- To see if an app is causing the issue, boot your phone into **Safe Mode**:
- Press and hold the **Power** button until **Power Off** appears.
- Long-press **Power Off** until **Reboot to Safe Mode** shows up.
- Tap **OK** to reboot.
- If the screen works in Safe Mode, uninstall the recently installed apps that may be causing the problem.
4. **Factory Reset (Last Resort):**
- If none of the above works, back up your data and perform a **Factory Reset** via **Recovery Mode**:
- Power off the phone.
- Hold **Power + Volume Up + Home** (or Bixby) buttons until Recovery Mode appears.
- Use the volume buttons to select **Wipe Data/Factory Reset** and confirm with the Power button.
Following these steps should help your phone respond to touch and unlock properly. ??
*Tip:* Always try **Soft Reset and Safe Mode first** to avoid losing data.
3/8/2026 7:56:40 PM •
Cell Phones
•
Answered
on Mar 08, 2026
•
35 views
I have replaced the screen
This usually happens when the
Home button or its cable wasn't connected properly during the screen replacement. On many iPhone models, the Home button is linked to Touch ID and is very sensitive to damage or incorrect installation.
Here are the most common reasons:
- The Home button flex cable is loose or not seated correctly
- The cable was damaged during removal
- The replacement screen is low quality or incompatible
- Debris or dust is blocking the connector
If Touch ID also stopped working, it's a strong sign the Home button cable is damaged. Unfortunately, on some models, Touch ID cannot be restored if the original button is damaged.
The best solution is to have the phone inspected by a professional technician who can reseat or replace the necessary components safely and test everything properly. A local repair shop can quickly diagnose the issue and prevent further damage.
If you want a professional check in Regina, you can visit:
??
https://nanotechmobile.ca/
1/26/2026 1:57:03 PM •
Cell Phones
•
Answered
on Jan 26, 2026
•
19 views
My iphone 4 is disabled and im running a chrome os that i cant download itunes or pretty much anything
If your iPhone 4 is disabled, it must be restored using iTunes on a computer.
Unfortunately, Chrome OS does not support iTunes, so you will not be able to fix it on a Chromebook.
You will need to use a Windows PC or a Mac with iTunes installed.
Connect the iPhone to the computer, put it into recovery mode, and restore it through iTunes.
If you do not have access to another computer, you may need to visit an Apple service center or borrow a PC/Mac to restore the phone.
2/25/2026 2:25:17 AM •
Cell Phones
•
Answered
on Feb 25, 2026
•
33 views
My d-1760 phones won't register
If your D-1760 phones will not register, first make sure the base unit is plugged in and powered on.
Try resetting the base by unplugging it for 1-2 minutes, then plug it back in.
Remove the handset batteries, reinsert them, and place the handset on the base to re-register.
Also check that the handset is within range of the base.
If it still will not register, the handset may need manual registration using the base menu or may be incompatible with that base.
1/26/2026 6:34:18 AM •
Cell Phones
•
Answered
on Jan 26, 2026
•
37 views
How to screen mirror sinotec with my iPhone,Smart Phone & Laptop
Sinotec TVs usually support screen mirroring via Miracast or HDMI, not AirPlay by default.
For iPhone:
• Use an Apple Lightning to HDMI adapter
• Connect it to the TV via HDMI
For Android:
• Enable Screen Cast / Smart View on your phone
• TV must support Miracast
For Laptop:
• Use HDMI cable
• Or Windows + K if wireless display is supported
If wireless mirroring does not work, HDMI is the most reliable option.
1/26/2026 6:29:00 AM •
Cell Phones
•
Answered
on Jan 26, 2026
•
5,036 views
I am in Canada and unable to access internet for my IPhone. Can you help
This is a common issue when traveling to Canada with a phone from another country. Try these steps in order: Enable Data Roaming: Settings > Mobile Networks > Turn on "Data Roaming". . Restart the phone or toggle Airplane mode on/off for 1 minute. . If it still doesn't work, the best solution is to buy a local Canadian SIM card (Rogers, Bell, or Telus) - it's cheap and works immediately. If you tried this and it's still not working, tell me your original carrier so I can give more specific advice.
1/3/2026 1:09:18 PM •
Cell Phones
•
Answered
on Jan 03, 2026
•
87 views
I CANT SEND EMAIL FROM MY HAWEI P8 LITE PHONE
A lot of the times people have this issue because of network issues, incorrect email settings, battery optimization restricting the app, or even a temporary glitch.
1/3/2026 1:01:10 PM •
Cell Phones
•
Answered
on Jan 03, 2026
•
45 views
App for antirevoke
There isn't a single "Anti-Revoke App" but rather a functional system using custom DNS profiles like: NextDNS. You can set up a specific DNS in your phones settings or use a shortcut to manage domains that communicate with your phones revocation servers.
12/29/2025 11:39:07 AM •
Cell Phones
•
Answered
on Dec 29, 2025
•
32 views
How do i remove a privacy protection password on a mobicel candy
- Try using Google Account if you've just forgotten the password
- Hard reset via Recovery Mode: this erases all data in the phones firewall.
- Once data is completely erased you should see one of the three default codes; these include ( 0000, 1234, or 0530)
If none of these default codes come across your screen after hard resetting your device then more than likely your default settings were changed when the privacy protection was placed on the device. At this point the only other option you have is "Firmware Reflashing" once your phone powers back on then go into the phone settings and use the "Android Recovery Mode" and reset your privacy password.
12/29/2025 11:21:44 AM •
Cell Phones
•
Answered
on Dec 29, 2025
•
34 views
Phone reads that data system is not working. How do I fix this?
Start with the quickest troubleshooting solutions and move towards more in depth solutions if needed:
- Restart your phone
- Toggle Air Plane mode on for a few seconds and then toggle it back off.
- Check and make sure your mobile data is toggled on
- Make sure that Wi-Fi is toggled off
- Power off & eject the SIM card and clean it gently, reinsert it and power phone back on.
- Check your data limits & app settings to make sure the app isn't restricted to "WI-FI ONLY"
- Check for any updates your phone may need
- Lastly hard reset network settings & start fresh
If none of these troubleshooters work, i suggest calling your service provider and requesting a replacement SIM card!
12/29/2025 11:06:55 AM •
Cell Phones
•
Answered
on Dec 29, 2025
•
41 views
Not finding what you are looking for?
![Beyond Premium Rubberized Blue SnapOn Cover Hard Case Cell Phone Protector for Samsung Corby Mate B3310 GTB3310 [ Cell Packaging]](https://www.fixya.com/fixya20/products/b/beyond/118x100/premium_rubberized_blue_snapon_co_1701013.jpg)
![Beyond Samsung Solstice A887 Premium Neon Green with White Cutie Skull Design SnapOn Cover Hard Case Cell Phone Protector for Samsung Solstice A887 [ Cell Packaging]](https://www.fixya.com/fixya20/products/b/beyond/118x100/samsung_solstice_a887_premium_neo_1701435.jpg)
