CoinMate One Speed Digital Currency Counter- Model BC-100 - Answered Questions & Fixed issues
Casio pcr-t290 even when turned to the off position it is still showing 0 s wont allow me to enter anything
This is a common issue. Try the following.
Power Cycle: Turn off the cash register and unplug it from the power source. Wait for a few minutes before plugging it back in and turning it on again.
Check the Mode Switch: Ensure that the mode switch is in the correct position. Sometimes, the register might get stuck if the mode switch is not properly set.
Reset the Register: You might need to perform a reset. This can often be done by pressing a combination of buttons or using a reset switch. Refer to the user manual for specific instructions on how to reset your model.
Battery Check: If your register has backup batteries, try replacing them. Sometimes, low battery power can cause the register to malfunction.
12/30/2024 2:08:43 AM •
Retail Supplies
•
Answered
on Dec 30, 2024
•
161 views
Setting up a TK-6000 from scratch.
Question edited for spelling of 'business'.
All questions need full 'make model (what it is) first 3 words.
No hits for TK-6000 apart from an aquarium water chiller.
https://www.google.com/search?q=tk-6000
They have an internal rechargeable battery to hold memory and after a long time unplugged, plus with age the battery will need replacing.
The Owner Key does all the functions, programming, Cashier User, X and Z Readings.
The Search query you need is
make model programming manual
..
11/4/2024 12:51:57 AM •
Retail Supplies
•
Answered
on Nov 04, 2024
•
25 views
How can I reset my NTS 3107N
The alarm won't cancel?
Question moved from Miscellaneous category.
All questions need full 'make model (what it is)' as first 3 words.
This appears to be a cash register so I moved it. The master reset button is normally hidden under the Total, or Sub Total buttons. Carefully prise up the plastic cover and you should see a small recessed red button. Press and hold for 30 seconds. Please note that this also resets all saved data, X Readings, Z Readings, Cumulative Totals, and Saved Presets.
Better to try disconnecting it from the mains supply overnight, and also look for simpler things that would cause the alarm, things like the journal roll running out, or jamming, or covers being open when they should be locked.
This appears to be only sold in South Africa? My experience is with Casio and Sharp in the UK.
..
9/20/2024 2:10:43 PM •
Retail Supplies
•
Answered
on Sep 20, 2024
•
24 views
On the sharp ER-A320 cash register I cannot clear out the total at the end of the day using the Z button
This takes troubleshooting.
Ensure You're in the Correct Mode: Make sure the cash register is in the "Z" mode. This is usually done by turning the key to the "Z" position.
Check for Errors: Look for any error messages on the display. If there are any, refer to the manual to understand what they mean.
Perform a Reset: Sometimes, a simple reset can solve the issue. Turn off the cash register, wait for a few seconds, and then turn it back on.
Consult the Manual: The user manual often has specific instructions for clearing totals. If you don't have a physical copy, you might find a digital version online.
Contact Casio Support: If none of the above steps work, it might be best to contact Sharp's customer support for further assistance.
8/30/2024 12:43:33 PM •
Retail Supplies
•
Answered
on Aug 30, 2024
•
773 views
Not finding what you are looking for?
