Genius EasyPen M610XA - digitizer, stylus - Answered Questions & Fixed issues

1. Open the Email app
2. Tap & Hold an email to select it
3. Tap other emails or folders to select more
4. Finally tap the trash icon to delete
5. Lastly go empty trash/deleted folder in your email account to permanently remove them.

1. Locate your settings app
2. Click "Face ID or Touch ID & Passcode" tab
3. Enter your current passcode, then tap "Change Passcode"
4. Enter your old/current password again, and then type your new password & confirm.

1. Make sure your device is charged to atleast 30% - 80%
2. Connect your device to stable Wi-Fi network
3. Navigate to your settings > Click on "General"
4. Locate "About Tablet" tab > Then click "System"
5. Select "System Updates" and let it run a check for any new updates.
6. If an update is available then click on it, and follow the on-screen instructions to download and install it.

?? Method 1: If You Can Boot into Windows

1. Go to Settings > Update & Security > Recovery
2. Under Reset this PC, click Get Started
3. Choose Remove everything to fully wipe the device
4. Follow on-screen instructions to complete the reset

??? Method 2: Hard Reset via Recovery Menu (If You Can't Boot Normally)

1. Power off the tablet completely.
2. Hold down the Volume Up button.
3. While holding Volume Up, press and hold the Power button until the iView logo appears.
4. Release both buttons when the Recovery screen appears (or Windows boot options menu).

1. Tap Troubleshoot
2. Tap Reset this PC
3. Choose Remove everything
4. Confirm and follow the prompts

?? Make sure:

• The tablet is at least 50% charged
• You backup any important files, as this will erase everything

?? If the Recovery Environment Does Not Appear:

• Create a Windows 10 bootable USB drive using the Media Creation Tool on another PC
• Boot the tablet from the USB (you may need a USB hub + keyboard)
• Reinstall Windows manually

? What to try

1. Restart / reload the level / restart the app
   • Sometimes assets don't load correctly. Exiting and re-entering the level (or force?closing the app) can restore missing conveyors.
   • If the game updated recently, your version might differ; reloading can sync the correct version.
2. Make sure your game is updated
   • If your game version is old, the level layout might differ. Update Candy Crush through your app store.
3. Check for board variants / multiple layouts
   • Candy Crush sometimes changes layouts across updates or by device. The version you see might have been altered.
   • Compare with videos (for example: **

Fix Proline SV701 Stuck in PTEST Mode:

1. Restart: Hold the Power button until it turns off, then restart.
2. Exit PTEST Mode:
   • Power off.
   • Hold Volume Up + Power.
   • Select "Reboot System Now".
3. Factory Reset (if needed):
   • Power off.
   • Hold Volume Up + Power.
   • Choose "Wipe Data/Factory Reset", then "Reboot System Now".
4. Reflash Firmware (if all else fails):
   • Use a computer, the correct firmware, and SP Flash Tool