Dynojet Research Secondary Fuel Module SFM-4 - Page 3 - Answered Questions & Fixed issues

0helpful
2answers

Bicycle serial number Want to know make and model

Sorry, comprehensive databases for bicycle serial numbers do not exist.
10/14/2022 11:13:10 AM • Cycling • Answered on Oct 14, 2022 • 269 views
0helpful
2answers

Can I get an installation manual or purchase parts

Here is the installation manual for Bruno Out-Sider ASL-250:http://www.griffin-medical.com/sponsors/4/1941/file_22791.pdf
10/11/2022 5:41:12 PM • Cycling • Answered on Oct 11, 2022 • 2,349 views
0helpful
1answer

Wanted to check in on how to raise my bicycle handlebar?

Slacken off the bolt in the top of the handlebar stem and tap it gently with a mallet. Then you can adjust the height, and tighten it back up. There is a video here https://www.google.com/search?q=hyper+700c+spinfit+adjust+handlebars ..
9/30/2022 8:50:44 PM • Cycling • Answered on Sep 30, 2022 • 132 views
0helpful
2answers

How do i fix a flat tire on my bike?

https://www.youtube.com/watch?v=58STtUM-Wow
8/26/2022 11:50:17 PM • Cycling • Answered on Aug 26, 2022 • 93 views
0helpful
1answer

How to change ball bearings on a crank assembly

To be honest, without knowing what kinda of bike you have, I would just be guessing. Since this is an old unanswered question, I would suggest watching Video's from RJ the Bike Guy and Bikeman4U on YouTube. They show you how to disassemble and rebuild Bottom Bracket, which is what you are really asking for help to do. Disassembly is very important to know, as for older bike have stuck or seized fixed cups.
7/19/2022 12:11:29 PM • Cycling • Answered on Jul 19, 2022 • 228 views
0helpful
2answers

Bottom bracket need replaced. needs a

impossible to tell you without knowing the bike brand and model and year, although you have provided that 1999.

If you take into a bike shop, which is the usual place to purchase the parts you need, they will be able to tell you what size Bottom Bracket will fit your bike, also what options you will have for replacement cranks and bottom bracket. This could be a very complicated issue when replacing with parts that are 11-12 years newer, the shop will be best equipped to give you all your options.
7/18/2022 4:13:54 AM • Cycling • Answered on Jul 18, 2022 • 604 views
0helpful
2answers

I got a nishiki anasazi bike and im looking for the right bottom bracket. The information the i find is a "square paper bracket". so im confuse about the rigth size.

With square-taper cranks, the bottom bracket spindle length required is determined by the particular brand/model of crankset. You can find the specifications online if you do a search using the brand/model of crankset. You will need a crank puller and bottom bracket tools to change it out. The main crankarm bolts should be tight, around 30 ft-lbs of torque.
7/18/2022 4:00:56 AM • Cycling • Answered on Jul 18, 2022 • 593 views
0helpful
1answer

What size is the rear wheel axle shaft on a

The Schwinn Meridian Trikes use a different type of axle than others such as Sun Bicycle Trikes. The center of Schwinn & Sun Trikes are the same and measured diameter at 17mm, but differ on the threaded ends... Sun Trikes continue with 17mm to the axle ends, but Schwinn Trikes taper down to 12.5mm axle ends to fit their custom size wheels. This Schwinn tapered reduction in axle diameter may be part of the reason why Schwinn axles seem to bend or break more easily. It seems that Schwinn requested these custom parts size to lock consumers into having to purchase solely high-priced Schwinn wheel/axle parts. As of 2022, buying replacement Schwinn Wheel/Axle replacement parts is a real pain because Schwinn will not sell direct to consumers, will not disclose Schwinn part numbers, and Schwinn Customer Service tries to redirect public parts inquiries to "authorized dealers". The problem is most local bike stores no longer carry Schwinn bikes or parts and the retailer "big-box" stores such as Walmart, Target, or Dick's Sporting Goods will only sell Schwinn parts for bikes they stock or have sold to you at that store. After complaining, to Schwinn Customer Service several times, they finally allowed me to order direct from Schwinn.
6/19/2022 6:40:47 PM • Cycling • Answered on Jun 19, 2022 • 1,339 views
0helpful
1answer

Is 30 minutes on stationary bike enough?

What are the results that you are looking for? What is your health condition? Go to a gym and get their advice. Most will help you out for free. Also have a check up from your doctor before doing any strenuous exercises.
6/1/2022 3:30:11 PM • Cycling • Answered on Jun 01, 2022 • 90 views
0helpful
1answer

Is the polygon premier 4 a good bike?

This sounds a bit spammy especially as you are 'Anonymous', but the reviews are positive. https://www.google.com/search?q=polygon+premier+4+reviews ..
5/12/2022 7:42:09 PM • Cycling • Answered on May 12, 2022 • 74 views
0helpful
1answer

Schwinn trailway clicking noise in rear wheel

Dirt in the internal axle bearing, To repair remove axle and bearings, clean dirt from them , grease the bearings which helps hold them in place while you insert axle and tighten down until wheel still spins freely. Problem should be fixed. Also clean out sprockets and oil them
3/7/2022 9:31:23 PM • Cycling • Answered on Mar 07, 2022 • 528 views
0helpful
1answer

Replacement spokes for rear wheel speedcart v1

I am pretty sure that you have to replace the whole wheel. You can't just change out the spokes. If you didn't steal the speedcart and you have the owners manual, then you would probably have a number to call. Otherwise, please recycle.
3/1/2022 10:54:29 PM • Cycling • Answered on Mar 01, 2022 • 265 views
0helpful
1answer

The diameter of a Meridian trike axle

26"
3/1/2022 10:44:51 PM • Cycling • Answered on Mar 01, 2022 • 506 views
0helpful
1answer

How do I program my bodyfit upright bike by sports authority?

How do I adjust my age
11/23/2021 6:05:06 PM • Cycling • Answered on Nov 23, 2021 • 402 views
0helpful
1answer

How to reset a Bell

You can also take off the thin metal piece and just take the numbers off and change it to what you want
11/11/2021 10:54:45 PM • Cycling • Answered on Nov 11, 2021 • 4,095 views
0helpful
1answer

My Giant Lafree Sport bike just beeps and won't turn on.

MINE IS DOING THE EXACT SAME THING. ALL I DID WAS TAKE BATTERY OUT AND PUT BACK IN. NOW A BEEP AND ALL 5 LIGHTS FLASH. LET ME KNOW IF YOU SOLVED THIS !!
11/5/2021 5:52:39 PM • Cycling • Answered on Nov 05, 2021 • 479 views
0helpful
1answer

I have a 20 inch dyno with serial number S9ET14652

Category moved from Firearm Optics to Cycles. https://www.google.com/search?q=20+inch+dyno+serials ..
3/20/2022 8:39:46 PM • Cycling • Answered on Mar 20, 2022 • 160 views
0helpful
1answer

What year was my Winchester Model 94 .32 Winchester Special Manufactured?

bring to a gunsmith for your answers
10/8/2021 12:32:38 PM • Cycling • Answered on Oct 08, 2021 • 152 views
0helpful
1answer

How to reset maintenance tray manually

You should only do that once. The maintenance tray needs to be replaced because the wipers and seals to keep your printheads clean need to be occasionally replaced. Not doing so will just damage thousands of dollars in printheads. Call an authorized Canon/Oce technician for parts and service.
9/17/2021 9:07:08 PM • Cycling • Answered on Sep 17, 2021 • 182 views
Not finding what you are looking for?
Dynojet Research Secondary Fuel Module SFM-4 Logo

0 questions posted

Ask a Question

Usually answered in minutes!

Top Dynojet Cycling Experts

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

73781 Answers

Kardoc

Level 3 Expert

7534 Answers

Tony Parsons
Tony Parsons

Level 3 Expert

6407 Answers

Are you a Dynojet Cycling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...