Fuser Error means that the device has experienced an internal hardware error.
1.Turn the device off and disconnect the power cord
2.Remove the fuser and then wait at least 20 minutes
3.Rotate the locks on the fuser to the unlocked position,grab the fuser handle and pull the fuser assembly from the device.
4.Using both hands, slow and steadily remove any paper or print media from the device and carefully re-insert the fuser and secure the locks.
CAUTION: The Parts on the internal surface of the fuser are very hot, so to avoid burning yourself,please do not touch those parts.
Reconnect the power cable, turn on your device and wait for it to initialize. If the error persist, Change the fuser assembly or contact HP Customer care. This instructions can also be found n your user manual. i hopes this helps.
Thanks
200 views
Usually answered in minutes!
×