Getting error report E 020 0181 - Canon CLC 1180 Copier

"E020" toner feed problem

There is a problem with the toner Hopper, ( where you add the toner)
having worked for Canon there are a couple of possibilities:
1-motor stirrir in hopper not working
2-stirrir in hopper stuck or not working properly
3-auger in hopper not working or clogged

this envolves removing the toner hopper and checking it out, if you are not a technician I would definately leave this one for a professional.
(can be very messy)

E020
There is a fault associated with the drum/developer.
For the first 2 digits of detail code xx12 through xxD0,
xx=01: Y
xx=02: M
xx=03: C
xx=04: Bk
xx81
The actual value is considerably
high in relation to the ITB surface
reflectance when a new
drum is fitted.
.
The fault occurs while ATR control is being
executed.
we face this problem it was from the drum unit , if you have a used (Y) drum unit in agood condition try it .

Hello, I would recommend first the easiest fix, lets try to reset the copier. Unplug the copier for about 5 minutes then plug it back in. If the error code returns you will have to internally clean the machine. This is a complicated and risky task. I would recommend you contact a professional, or you can download a copy of the service manual at the following link:
http://www.nodevice.com/manual/newmans/canon_clc_1180zip/get9816.html

This manual will give you step by step instructions for alot of common repairs. I hope this will FixYa, and please dont forget to rate me. God Bless
Mike

The machine needs to be cleaned. If you have any further questions let me know. Please take a moment to accept and rate my solution accordingly.
Thanks,
Lee