At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Hello, both ttx turntable when i hold the platter, stop and dosent turn alone i need to give it a slow push, plus on ocations, when i press stop and press again star dosent go ahead, need to push the platter, what can be the problem?
Thanks
Wilfred will_dj91@HOTMAIL.COM
Cisco el Nino - "since numark fixed thier overheating problems by adding a vent under the platter, i think that what is happeing is that our DC MOTOR DRIVER IC (Toshiba TA7259P) has gone bad what i am going to do it order this, install it and let you know the deal. there only 5.80 a piece and shipping is like 8 dollars. ill get back to you. I am guessing it is sort of like computers CPU, like its got thermal gel/grease on it and all that fun stuff. It is on the Motor's board heres the image
also take your time when installing the chip. 1. its sensitive to static. 2.buy a low heat soldering iron. 3.do each solder point at a time, wait a few seconds for the IC to cool off. then approach the next. also open your ttx and see what exact IC you need. Mine was a Toshiba TA7259P. Also when you order that, order small tube of thermal paste.
Mad props. This elongates the life of the Numark TT turntable series indefinitely, because they are good turntables, but they had this problem. Well, no longer.Hey all credit here gopes to DJCiscoElnino@aol.com for coming up with this mod/fix.
Cisco el Nino - "since numark fixed thier overheating problems by adding a vent under the platter, i think that what is happeing is that our DC MOTOR DRIVER IC (Toshiba TA7259P) has gone bad what i am going to do it order this, install it and let you know the deal. there only 5.80 a piece and shipping is like 8 dollars. ill get back to you. I am guessing it is sort of like computers CPU, like its got thermal gel/grease on it and all that fun stuff. It is on the Motor's board heres the image
also take your time when installing the chip. 1. its sensitive to static. 2.buy a low heat soldering iron. 3.do each solder point at a time, wait a few seconds for the IC to cool off. then approach the next. also open your ttx and see what exact IC you need. Mine was a Toshiba TA7259P. Also when you order that, order small tube of thermal paste.
Mad props. This elongates the life of the Numark TT turntable series indefinitely, because they are good turntables, but they had this problem. Well, no longer.
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hey all credit here gopes to DJCiscoElnino@aol.com for coming up with this mod/fix.
ok here goes
original asisphonics link: http://www.asisphonics.net/ubb/ultimateb...
Text info:
Cisco el Nino - "since numark fixed thier overheating problems by adding a vent under the platter, i think that what is happeing is that our DC MOTOR DRIVER IC (Toshiba TA7259P) has gone bad what i am going to do it order this, install it and let you know the deal. there only 5.80 a piece and shipping is like 8 dollars. ill get back to you. I am guessing it is sort of like computers CPU, like its got thermal gel/grease on it and all that fun stuff. It is on the Motor's board heres the image
(IMG:http://img97.imageshack.us/img97/9139/tt...)
after i install it too, i am also going to cut vents like this under my platter like the updated versions
(IMG:http://img97.imageshack.us/img97/8523/tt...)
also take your time when installing the chip.
1. its sensitive to static.
2.buy a low heat soldering iron.
3.do each solder point at a time, wait a few seconds for the IC to cool off. then approach the next.
also open your ttx and see what exact IC you need. Mine was a Toshiba TA7259P. Also when you order that, order small tube of thermal paste.
http://www.audiolabga.com/ for parts ordering"
Thank DJCiscoElNino@aol.com
Mad props. This elongates the life of the Numark TT turntable series indefinitely, because they are good turntables, but they had this problem. Well, no longer.
×