I programmed my cable remote with the 4-digit code shown in the remote's code list so I can turn on the receiver at the same time as the TV and cable box. I thought I had the right code because the receiver turned off when I hit the power button. But when I hit the power button again, the TV and cable box came back on, but not the receiver. I'm pretty sure there's nothing wrong with the receiver on-off switch, because the receiver remote turns it both off and on. I'm thinking there might be a more up-to-date setup code for this particular receiver, since it's a fairly new model. Is there somewhere to find the setup code for each individual receiver model made by Onkyo? Or do you have any other ideas about what the problem might be? Again, the only remote code I know of for Onkyo receivers (0135), when programmed into my cable remote, allows me to turn the receiver off but not back on. Help!!!
Anyone have the receiver code for the onkyo htsr 800?
Yes...Lets state this more clearly. Does anyone know the code for the Onkyo HT-S790 or HT-SR800?
That is because i think that your reciever would have its own code
SOURCE: CORRECT SETUP CODE FOR RECEIVER
Originally Posted by 3FingeredGlove 
We can make this work. You didn't mention which setup code you're using, or explicitly say whether the OK/Select button is red or gray (the manual you're using is for gray), so these are somewhat generic instructions. Should work, though. This will provide a power toggle function to the Power key.
Use red numbers for the red OK/Select button remote, grey numbers for grey button remtoes.
Temporarily assign setup code 30842 or 0842 to AUX
1) Tap AUX
2) Press Setup until 2 blinks
3) Enter 30842 or 0842The remote should blink twice
Assign NEC1 IR protocol device 210, subdevice 108, function number 203 to Power (you don't need to understand these numbers)
1) Press Setup until 2 blinks
2) Enter 994 (2 blinks)
3) Tap Setup
4) Enter 00051
5) Tap Power (not All On)
The remote should blink twice
Assign setup code 30135 or 0135 to AUX (this is NEC1, 210.109)
1) Tap AUX
2) Press Setup until 2 blinks
3) Enter 30135 or 0135
The remote should blink twice
948 views
Usually answered in minutes!
Have the same problem with Onkyo SR 800.
0135 and 0842 are the only listed codes and they do not work correctly.
Help?
×