This is a board communication problem, you need to replace the control board. If you send me the model # I can tell you what the part number and price would be.
Mike Anderson
Anderson Appliance Repair
(865)945-3808
E68 flashing with drying,cool down,extended tumble flashing ?
SOURCE: frigidaire dryer error E4A
Hi,
This is this is the "program Timeout Fault". Meaning the drying time has exceeded program time for that cycle.Press Pause Cancel and SELECT buttons for 6
seconds to exit test modes. Position cycle selector to NORMAL,
temperature selector to HIGH HEAT and touch START. Check for anything
that would extend dry times such as: no heat, restricted vent, blower
fan blade broken or loose, dryer installed in closet with solid door,
or bad connection in moisture sensor bar circuit or dirty bars. If
dryer operates normally but code returns, replace electronic control.
Hope i helped you.
Thanks for using ' Fixya ' and have a nice day!!
1,527 views
Usually answered in minutes!
error code 61 shows up on our new affinity dryer and it is not heating up
CODE E05
My dryer is LOUD! Is it going out or is something loose?
×