I just put in the new elec. door lock in. worked good once now get an error code d fl what is it now?
Alot of times the computer wil cause this error code. Take the top panel off via 3 screws in the back. Slide the top off. There should be white bow with a bunch if wire going into it. Pull up on some of the wires on the right side. They are held in place by a plastic harness. This harness pulls down on some of the wires and causes a bad connection. If this doesnt work you may have to replace the computer. Hope this helps. Dave www.washermd.com
57 views
Usually answered in minutes!
×