I have a Sears / Craftsman Multi-Function Keyless Entry garage door opener model 130.53876 and need to know how to reprogram it.
On the garage opener that actually opens the door the one on the
ceilling has a green or orange button that is called the learn button
just press and release it you have 30 seconds to punch in a 4 digit
code and when your done press and hold the enter button until the
lights on the garage open blink once or twice then just press the code
again and it will open the door press enter once to reverse the effect
and and twice to stop the door completely.
Hope that helps
excellent. thank you for the information.
I so want this to work... but it doesn't on my brand new opener. I have tried it a dozen times. I've reset the Learner (and had to reprogram my two transmitters, which did fine). The keypad just won't get learned... not lights blink on the opener. Any more thoughts, ideas on this? Thanks!
I so want this to work... but it doesn't on my brand new opener. I have tried it a dozen times. I've reset the Learner (and had to reprogram my two transmitters, which did fine). The keypad just won't get learned... not lights blink on the opener. Any more thoughts, ideas on this? Thanks!
×
Hit learn button for 2 seconds, enter 4 digit code on keypad and hit enter. light bulb blinks 2x. for remote, hit same learna and hit remote button.
2,224 views
Usually answered in minutes!
It is not clear. Hit on what(learn) button. what is a learn?
I have a different problem. After following the directions, the door can be opened and closed just by pressing enter. No security there!
×