ERR: STAT PLOT

SOURCE: my TI-83 doesn't plot

The problem seems to be that the list is archived. To fix this go to memory menu (2nd and mem) then find L1 or whatever list you want and hit enter next to it. This will get rid of the big asterick and then you can graph it or you should be able to.

SOURCE: how to remove "err: invalid dim".

Hi,
The solution for the problem is simple. When you use the calculator to create graphs, it is configured to accommodate the specificities of the problem. However that configuration remains set after you terminate the problem. So when you try to use the calculator to do other problems it uses the stored configuration parameters, which may be incompatible with the new problem.
In particular, list of paired-variables must have the same dimensions: There must be the same number of elements in each list.

To make a long story short, you should make it a habit to reset the Ram everytime you want to do a new problem. If for reasons of you own you do not want to reset the Ram, you can prevent this type of errors from occurring. This is how you do it.

1. Press [2nd][Y=] (STATPLOT)
2. Choose option [4:PlotsOff][ENTER]. Screen displays Done
3. Press [2nd][0] (CATALOG)
4. Press [PGRM] (C) to jump to first command that starts with c.
5. Use arrow to scroll down to ClrAllLists, select it [ENTER]
   
6. Calculator displays Done
7. Start the new problem

SOURCE: ERR: WINDOW RANGE 1: QUIT

There's something wrong with your window limits, for example Xmax < Xmin or Ymax < Ymin. Press WINDOW to bring up the window editor and examine the values, making sure there are no inconsistencies.

If you don't see anything wrong, post a comment here listing all of the entries in the window editor.

SOURCE: On my TI-83 Plus calculator,

First lets make sure you have a manual. go to: http://ec1.images-amazon.com/media/i3d/01/A/man-migrate/MANUAL000010670.pdf Go to chapter 3 and it explains the details in graphing

SOURCE: whenever i try the graph

You have to turn all statistical plots OFF before you draw function graphs. Press [2nd][Y=] to open the statistical plot configuration screen. Press [4:PlotsOFF] and then [ENTER]. When calculator answers DONE you are ready to draw function plots.