Press clear mode key follow by 107 and hold the stop/clear key to enter sp mode power the copier off and on if the problem reoccur replace fuser unit and enter mode and off and on the copier
SOURCE: i have my gestetner 1312 code appear sc542..i
try installing a new driver for you model. you can download it here->>http://www.liutilities.com/device-driver/gestetner-dsc424-ps/
check this link too, it will be useful.-->http://www.qualpro.com/Products/Copiers/Color_Copiers/DSc424/DSc424.htm
Thanks for rating
good luck
SOURCE: We have a Gestetner 3355 in our office, there is
Maybe it's a power problem.
Do you have equipment plugged into a UPS? If so I would advise you to directly connect to power without the UPS.
If it still does not work try this procedure:
1. Set the machine to turn off with the weekly timer.
2. After the machine has turned off, turn the switch on and off operation at least ten times.
SOURCE: Gestetner 2212 copier Service Code SC542 I"ve
In your machine (model) you have to enter in SP mode to reset your error code.
Try this:
Yellow key.
1-0-7 on the key pad
Red key at least 3 sec.
Press "copy sp"
On the key pad press 5 810 and #.
Press execute
Exit all the way out.
Turn the machine off and on.
216 views
Usually answered in minutes!
×