Good day the printer warms up and shows 55 error service. the roll device that makes the paper enter works on continue . since i do not have the manual you could help with solution or tell me where to fond the manual on internet thank you
The 55 error doesn't boil down to one specific problem and most information will tell you the following: 55 ERROR (Internal Communication Problem) 1. Replace DC Controller PCA. 2. Replace Formatter PCA. 3. Replace both at same time. So sounds alot like the main board is starting into a nose dive, but seeing as that particular printer is on the older side, you might be able to find the part on the cheaper side, check out e-bay, they have some HPIII part around. Good luck.
327 views
Usually answered in minutes!
×