Remote codes I cannot find any remote codes to enable my Comcast cable remote to operate my haier tv

You can find the remote control codes for different brands of devices from
http://www.hifi-remote.com/ofa/codes-tv.shtml#tv

If none of the codes work then we have two other solutions:

1. Searching For Your Code

If you have tried all of the set-up codes for your brand of equipment ,or your brand is not listed, and you are still not able to get the unit to respond, try the following procedure to search for your code.
If you don't find a code that works, the remote will flash four times when you reach the end of all the codes for this device type.

1. PRESS the button for the device you want to program, (TV, VCR, CABLE, etc.), then RELEASE.
2. PRESS and HOLD the SETUP button until the red LED flashes twice, then RELEASE.
3. ENTER 9-9-1 (two blinks on the remote)
4. ALTERNATE slowly between the POWER key and the DEVICE (TV, VCR, CABLE, etc.) button until your device turns off. (On VCR, LD, and CD players use PLAY instead of POWER)
   Make sure that the remote is pointed at your device during the search, You may have to press this sequences of buttons up to 100 times to search the entire library of codes.
5. When your device turns OFF, PRESS the SETUP button and RELEASE it to lock in the code for your device.

1. PRESS and HOLD the SETUP button until the red LED flashes twice.
2. PRESS 9 - 7 - 5, the red LED will flash twice.
3. PRESS the DEVICE key where you wish to learn the function. The next 3 steps must be completed within 10 seconds.
4. PRESS the button that will receive the learned function, the LED will flash rapidly.
5. PRESS the button on the original remote to be learned.

Tell your local comcast office there to give you one of the remotes that has a red ok button on it. That remote will work with haier tv's. They take 5 digit codes and for haier tv's the codes are 11034, and 10768. You simply press tv then hold down on the setup button and enter one of those two codes. One should work.

I called Haier and was told their TV's do not work with any other remote other than one that is supplied so universal and satellite remotes are out. Not a good company to choose for the way technology is headed and will be gone before long if they do not get with it.

We have a haier TV HTR-022
we forget the code of the remote control if u have solving our problem with best regards
bedar

I encontered the same problem with my old 13" Haier tv i bought back in 2001. I bought a Radio Shack Family Favorite 5-in-1 remote for $14.99 since it was the only one that listed Haier. That code was 1034. Try that.

That didnt work for me unfortunately, so I referred to a combination of the troubleshooting of the 2 previous models (4-in1 and 3-in-1).

1. Press "TV" button
2. Hold "P" (program button) till the "TV" button flashes once then twice
3. Enter 9 9 1, and the "TV" should flash twice
4. Aim the remote at the TV and hold the Power button down for at least 3 seconds. (Remote automatically goes to first code but it probably wont work so go on to step 5)
5. Press CH+ repeatedly till the TV shuts off and stop immediately!
6. Hold "P" for 2 seconds
7. Hold "Select" for 2 seconds
8. Hold "P" for 2 seconds
9. Hold Power for 2 seconds and TV should turn back on.

If not. Repeat steps 1 thru 9. I know it sounds tedious but its the best bet. It took me three tries because my finger slipped and hit other buttons or I didnt stop when it shut off. I spent 3 hours looking for codes online and nothing worked.

Replacement on the Haier website is $19.99 plus a load in shipping. This beats that!

Good Luck!