I got an error code 02 can you give some advise
Here is how you interpret the LEDs to get the code number:
0001 power supply problem
0002 Network Interface problem
0003 Power problem could be the PSU could be the GPU/CPU, somehow the console isn't getting clean power from the power supply.
0010 over heating
0011 over heating - If you are receiving this error after disassembling your console make sure to all 8 of the heatsync screws are tightened securely to the board/heatsink holes.
0012 over heating
0013 over heating
0020 (Not yet known, possibly overheating)
0021 DVD Drive Time out - Can be caused by problems with a firmware flash. This is also speculated to sometime be caused by a problem with the southbridge chipset on the motherboard.
0022 GPU Error / GPU Overheating
0023 (not yet known)
...
0101 (not yet known)
0102 unknown error
0022 CPU error, generally caused by a poor connection to the
mainboard (cold solder joints/bridged solder joints). This can also be
triggered by an error with the TSOP.
http://forums.xbox-scene.com/index.php?showtopic=484726
also, 0020 I found happens when you replace the xclamps with screws and screw them too tight. loosen a little bit and it goes away
Hi mi error its 0003 i reed that the problem is the power or something else, how can fix?
Hey guys, does anybody know the cause of 0020?
For the power supply thing you need to buy a new power brick that plugs into the wall and then the 360
You should check your power source, the led turns orange when idle and should turn green when power up... if its red you need to replace it
Hi,
O.K. now I know what is code (on my xbox 0001), bur anybody can tell me, what exactly is this power supply problem and how to fix it?
My 360 originally gave the 0101 error. I cleaned the thermal paste and replaced it with artic silver at which point it still did not work. Then randomnly it worked through two boot ups to dash. Then it stopped again giving 0101 error again. I was informed that I should use the heat gun and 12V the fans. I did this and now the 360 gives 0022 GPU overheat error on boot.
When started up it gives no A/V output, and spends a long time on one green led before showing three red.
The secondary error code is always 0022 GPU overheating.
I cleaned and replaced the thermal paste today and it still shows 0022.
I cannot fathom why it shows GPU overheating so quickly whilst not even outputting sound/video.
Any help would be appreciated.
To the guy who asked about the 0001 code, i had the same code, then i took off the intercooler and plugged the power cord straight in like normal (without the intercooler) and it went away and works like stock again. Try that!
What do you do when you get 0010?
Hi, i got the xbox code 0101, any help?
Help me i got one red light and E 101 on the screen
SOURCE: xbox360 error code
Your description is not very clear for the light sequence and actual error code displayed on screen.
The following web site has a good list of error codes and remedial advice. Check it out and let us know if this helps you pin down the error code.
10,133 views
Usually answered in minutes!
error cord 0012
×