Some models are equipped with a sensor that can automatically adjust the oven's heating time based on the amount of steam in the oven. If your microwave is displaying E1, E4, or E5, there may be an issue with the gas sensor. For an E1 error, press the Cancel button and check on the food. If the message is either ERROR or E-6, it indicates a mechanical fault. For all error indications, try unplugging the microwave from the outlet for at least ten minutes and then plug it back in. If the error persists, the microwave may require service. Please use our ASC Locater to find your nearest Authorzied Service Center
SOURCE: error code E 63
I'm not finding that error code. Does it come on 2 minutes after you plug it in? If so, it may be a failing keypad or door switch / mount. Of two minutes after you have been cooking? That may indicate a bad humidity or other sensor. Please give more detials so we can help further.
1,848 views
Usually answered in minutes!
Our Samsung microwave is displaying error code E5 after we were using the stove to heat up some food. The microwave is an "above oven" microwave and has worked fine for a year. Not sure what to do...
Received E-63 code when popping pop corn. Used the popcorn button. Some of the Popcorn was burned by the time the oven cut off. Turntable was very hot.
Let oven cool off and heated a cup of water for 1 minute. Haven't tried another bag of popcorn yet.
Same OTR microwave only in white. Same problem when I popped some popcorn. A few kernals burned a little. Just hit the cancel and boiled 2 cups of water to test it and it worked fine. No clue. Maybe the E63 indicated burnt food?
Had the E-63 message while making popcorn immediately after burning some popcorn. Samsung's manula and website were useless. Also boiled water without a problem, but have not tried another bag of popcorn yet.
×