How To Fix Hp Printer Error B0605?
The hp printer troubleshooting procedure for HP LaserJet Printer Error Code B0605 is as follows:
Method 1: Update The Firmware
Method 2: Resetting The Toner
B0605 message. Follow HP's directions at http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c01687323&lang=en&cc=us&conte...
and put the printer in BootCode mode then ran the firmware updater.
The directions indicated that the printer would restart on it's own, but if does not, so let the printer sit for about a minute after the Firmware Updater says it was done, then power down the printer and pull out it's power cord. Let it sit for about 15 seconds, then plug it back in and start it up. When the printer starts up, the printer's display may go through a bunch of messages (Erasing...) for a few seconds. When it finishes with all of the messages, you should be able to print to the printer again.
I hope this helps. Regards, Mike
2,293 views
Usually answered in minutes!
×