Jsh digital safe ...... I changed the batteries in my safe today and not when I try to enter a code all I get is “no date” on the screen ? Can anybody please help

SOURCE: NEEDED TO ENTER RADIO CODE

If you take the radio out and get the serial # and Vin# of your vehicle and call 1-888-mitsu2005. They helped me me with the code.

SOURCE: I have an Audi TT 2001, After entering the code

you need to hold down tps and fm2 again after you enter the code
good luck!

SOURCE: How do I enter my radio code on my 2006 Honda

I believe you have to call the dealership with the code and they will tell you what to enter

SOURCE: 2001 Audi A4 radio in safe mode. Battery was

sorry to say, you will need to take it in, it needs to be hooked up to their computer to reset and have it start up poperly. It just like a pc when it crash it will try to start in safe mode until you select "Normal" start up

SOURCE: my radio is in 2

IMPORTANT NOTE: You must have the security anti-theft code for your Audi radio from the car manufacturer, or from an Audi dealer!
The sequence of programming for Audi radio is:
1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.
3. By the #1 key you will set up the first safe code digit.
4. By the #2 key you will set up the second safe code digit.
5. By the #3 key you will set up the third safe code digit.
6. By the #4 key you will set up the four-th safe code digit.
7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed. The radio is now ready for use!