I get a PA error code with a flashing LED. This code is not in the list of error codes

SOURCE: doesn't turn on power led flashing blue then light blue then off

http://forums.nvidia.com/lofiversion/index.php?t55653.html

LOTS OF PEOPLE ARE HAVING THE SAME PROBLEM IT IS A FIRMWARE PROBLEM AND THESE MONITORS ARE NOT COMPATIBLE WITH VISTA. VISIT THE SITE TO SEE OTHER PEOPLES SOLUTIONS ETC....

SOURCE: Comcast Remote Code for Panasonic CT-2707D

panasonic expects a 5 digit code. add a 1 to the codes lists, worked for me. 10250, 10051

SOURCE: Panaboard UB-5815

The fluorescent lamp is dead.

SOURCE: Toshiba error codes - flashing LED

Memory problem?

SOURCE: blinking error code C:21:00 how to remove from sony camcorder

For me, the alcohol sensor cleaning didn't work. I did some research on how the sensor works and it turns out the black stuff is conductive in low humidity and resistive in high humidity. That means the circuit need to be cloed to work,, cleaning off the black substrate would only open the circuit furthur, I cant understand why removing the black substrate is working for some people. After cleaning it to no avail, I tried bypassing (shorting) it. To test it I just took an ordinary pencil and filled in some conductive carbon where the black square was. And it worked. I could have bypassed the sensor by shorting the 2 solder contacts, but to reach it I would have to take it all apart. I'll make the bypass permanent when I have a day free.