Please HELP Have a tv that i lost the remote to so i'm trying to program a universal but the tv does not have a name on it anywhere, it has some kind of symbol how do i program it?

Before attempting Set-Up, please review each step in the instructions
to find the correct set-up code. If device (TV, DVD, etc) does not
respond, repeat steps outlined below, and try each code listed for the
brand of your device.
1. Turn on the device you want to set-up (ie: TV, DVD, etc).
2. On the remote control, press the device key for the device to be set-
up. For example, to set-up a TV, press the TV key; to set-up a DVD,
press the DVD key, etc.
3. Press the "SET" key and hold until the small light ("LED") on the
remote control blinks twice, then release.
4. Enter the Code for your device. If you've done it correctly, the "LED"
light will blink twice. (Note: 'Codes' are listed on the website as I put the link below)
http://www.ofausa.com/list_codes.php?db_value=access4&remote_choice=URC4220
5. Press the "POWER" key and the device will turn off.

Good Luck