F21 Long drain Possible cause: Clogged filter, clogged/failed pump.
1)
Removing the front panel just under the washer door can be tricky, it
is secured underneath by 3 1/4" hex screws, you may need a special hex
driver or ratchet to remove (can get at home Depot for $4)
2) Make sure you check the tubing from the drum and out to the drain
they can be clogged to
3) Twist open drain filter slowly, water will come out so put a heavy
duty garbage bag underneath to catch water
4) When replacing filter make sure to line up notch at the
top of filter with the groove inside and then slowly screw clockwise
back in until tight
5)Make sure to replace front cover tightly, there is a drip fuse that
won't let the washer run unless front cover is back on.
Socks are the most common thing you can found.
http://www.youtube.com/watch?v=qQTvBSnEWsI
Check
the above video it can be helpful.
169 views
Usually answered in minutes!
×