The fan stopped working when it was moved from one room to another. The power indicator does not light when the switch is pushed.

Unplug from outlet when moving fan from one location to another, before putting on or taking off parts and before cleaning. The possible reason for light not coming on is either the power outlet in which fan is connected is faulty or the fan power cord itself is not plugged in properly.Remove and re-check both the possibilities.If both checked ok then its time to check the power to the outlet by meter.Remove the fan power cord and check it with continuity tester.if the power cord is short then continuity tester will not glow.if the power cord is ok the tester will glow red light.If power cord checked ok then its time to check the internal power supply board.There is a fuse and other electrical components on the board.If any of the one gets short or stops functioning the fan light will not power On. The components needs to be checked with meter and faulty component has to be replaced. 1. Set the fan on a dry level surface. 2. Plug power cord into any standard 120V AC outlet. 3. To turn the fan on, press either speed control button. 1-Low, 2=high. 4. To turn the fan off press the on/off button. 5. To turn on the oscillation feature press the oscillation button once. To turn the oscillation feature off press the oscillation button once. To contact bionaire service center .Please read the following as follows:- If you have any questions regarding your product or would like to learn more about other Bionaire® products, please contact our Consumer Service Department at 1-800-253-2764 or visit our website at www.bionaire.com Thanks. keep updated for any more query.you can rate this solution and show your appreciation.