- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
as soon as u bought the universal remote it came with a paper that say a bunch of codes find ur tv model go to set up look were u can put in the code and follow the code exact
I don't have a code book for you, but I can tell you how to program the RCR660 using the automatic programming feature.
Programming RCA model RCR660 (no code search button) While following these instructions, keep the following in mind: device = the component you wish to control with your remote (TV, DVD, VCR, etc.) DEVICE = the button labeled for the component you wish to program 1. Turn on the device you wish to program. 2. Turn off all other devices in the general vicinity. 2. Press and hold DEVICE 3. While holding DEVICE down, press ON/OFF and hold them both down until the LED turns on for that device. 4. Release both buttons. 5. Point the remote at the device, press and release PLAY and wait 5 seconds or until the LED stops flashing. 6. If the device does not turn off, then continue to press PLAY and wait the required interval (for a maximum of 20 times) until the device turns off. 7. When the device turns off, press REVERSE, wait two seconds and continue doing this until the device turns back on. 8. To finish programming, press and hold STOP until the LED turns off.
×