SMC - A wonderful choice...
ADSL ROUTER
============
1. Update firmware of your WEBT-G
2. Make note of SSID and channel of your ADSL Router
3. Change encryption of router to WEP and set the WEP key.
WEBT-G
======
1. Change to repeater mode (operating mode)
2. Change SSID and Channel to match SSID and Channel of ADSL Router
3. under Wireless Settings, Channel and SSID, check if wireless mode is 11b/g mixed mode
4. under wireless Settings, WDS, click on Scan - you will see a list of wireless devices (or just one device - your ADSL router), select 'Enable WDS' option here
5. Under Security option, Select WEP and set the WEP key (the key should be same as the WEP key in your ADSL Router)
This should do it... Hope it works - good luck.
Rgds
Asif
You make a device into ap mode you can get it
4,051 views
Usually answered in minutes!
so, you are suggesting me to switch to AP mode. is that correct? but i need to be able to extend the network without connecting the router and WEBT with the cable... everything must be done wireless
tx
korg
Hi.
thanks for your help ... but I have called the SMC hot line and they told me what to do. There was again an issue, that my customer wanted to have (just for few weeks) open network with no encryption which I did and its working. Do you think that I should anyhow put an encryption on it?
korg
ok. my next question would be (I think its better to ask SMC and not to put the question here) why only WEP???
Korg
×