Eror code 6203
Turn off the printer
unplug the power chord at the back of the printer
wait for 5-10 sec.
replug power chord
turn on the printer
How do I resolve the error message "Scanner home not detected" (error code 6203)?
for more ghelp visit https://cbrtechsolutions.net
There can be plenty of reasons behind Error code "6203". These error codes often get displayed during printer installation. It is often seen that 'Error code "6203" gets displayed mostly when the printed calibrated sheet is put into the tray for scanning purpose and push button is pressed.
SOURCE: Kodak Easy Share 5300 Printer error Error
Error code "6203" can be resolved as follows:
First, you need to open the access door of the printer and disconnect the power adapter from it.
You then need to wait for at least 30 seconds for the printer to get reset.
As a next step, you can connect the power adapter back to the printer.
You can turn on the printer, if required. Once the printer gets powered up, a message "Printer access door open" gets displayed.
Once this message gets popped up you can close the access door of the printer. get more help for Printer Error Code 6203
Hope this helps you.
819 views
Usually answered in minutes!
The 5300 All-in-One Printer will still not scan when I hit the scan button and then hit start. It makes a loud noise I can't describe and just sits there with the word Scanning on the screen, but does nothing. Error code 6203.
×