SOURCE: I have a Sharp ARM350N
it is scanner out of position, swich off then swich on it should reset it.
Dave Moore
right document solutions
02074664700
SOURCE: My Sharp AR-336 copier gives
when you turn on the machine it rotates and takes severaal readings from different sources. one of them is for the drum, adjusting the seperation to the age of hte drum. So as the drum ages with the amount of copies it automatically adjust it self. Have the tech replace that sensor (if they haven't done so) or maybe it just has toner on it giving false readings.
http://www.copier-help.com/copier-help/ecs/sharp/ecssf2216.html
SOURCE: error code h5-01 appeared on my sharpmar-507
Check the fuser unit and make sure its installed correctly.
SOURCE: IS there a reset code for a Sharp AR-507 copier,
enter simulation: pound, interrupt, clear, interrupt, then enter 14, press start,press execute on touch screen, press ca until copier restarts, this is a general clear code, if problem returns you will have a heat problem in the fuser.
181 views
Usually answered in minutes!
×