I need an exploded view of a butterfly impact wrench

SOURCE: I DESPERATLY NEED A DIAGRAM OR EXPLODED VIEW OF

take it to a servce centre for air tools ,there is a little neoprene or plasic o ring right up in trigger area ,that gets brittle and starts to break up. bugger of a job, why waste aday they wll do it in a flash (sort of) youdoit

SOURCE: sand has entered my CP734 impact wrench.

Check the following website. It is a pdf file, so you will need Acrobat Reader, which is available on this website. After it loads, it lists various CP model numbers on the left side, so scroll down to 734 and click on it( it says 734 OBS) and it will open an exploded view of the breakdown of the CP 734 impact wrench. On the Acrobat toolbar, you can expand the picture as much as you want to and print it.

Good Luck!

SOURCE: Need exploded diagram of ingersoll rand Model 8049

Here you go... I needed the same...

http://www.powertoolrepairohio.com/pages.php?pageid=14&breakid=1118

SOURCE: Dont know where to put oil in Craftsman 1/2 " Impact wrench

I just bought one of these also. Manual says oil goes into "the air inlet" which I'm thinking is where you attach the hose. That way the oil is sprayed throughout the interior of the gun once you run air through it.
Question for you: I can't get an impact socket onto this gun, almost seems like the square hole is too small. (yes, both are 1/2" drive). How do you get a socket on this stupid thing?
(man that sounds like I'm an idiot, but I've spent a half hour leaning all my body wight, wiggling, etc. and can't get a damn socket on)