The CTD Unit is a Sensor on or near the Transfer Belt Unit on your Dell Laser Printer. This error is advising that the sensor is dirty and may need cleaned.
If you receive one of these errors please clean the CTD Sensor on the Printer.
SOURCE: printer will not print, error code 5010 is
5010 is a scanner error, either worn out scan lamp or sensors. Canon only replaces the entire scan assembly, if you like I can get part number and price.
SOURCE: Printer error 6A80
6A80
6a90
c000
6C10 feeder unit and / or purge unit defective.
Blocked Zahnrad-/Kupplungs-Verbindung between the two systems / defective.
Troubles with purge pump and or purge tube plugged (clogged). Needs service tech.
SOURCE: We have a Dell 5110cn and we keep getting a
Follow the steps under "Cleaning the Automatic Density Control (CTD)
Sensor" heading at the following link. If the problem persists after cleaning the sensor may be faulty and you will need to contact Dell for warranty support.
http://support.dell.com/support/edocs/systems/5100cn/en/UG/section21.html#1097283
SOURCE: Dell 5100cn has error message: Clean CTS Sensor -
I've included a link below to the manual for your printer. Please follow the instructions listed under "Cleaning the Automatic Density Control (CTD) Sensor".
http://support.dell.com/support/edocs/systems/5100cn/en/UG/section21.html#1097283
527 views
Usually answered in minutes!
×