Questions & Answers for: Dodge allignment Computers & Internet

Question about 1993 Intrepid

2 Answers

hard to shift into park I have a 97 intrepid and also had problems shifting in to park, the problem turned out to be the body to frame isalator bushings were bad .these rubber bushings are under the ...

Ad

any way to change the cv axle without getting the car alligned You need to mark the bolt heads of the lower bols in the struts with a paint mark or a center punch on themount and head a make sure the ...

Ad

exclamation mark with like a smiley face underneath .....i just got an allignment and driving home this light came on I believe this is the air tire pressure monitor. heck you manual to be sure

Front driver side tire leaning at the top towards the car Go have the allignment checked.

when i get to the speed of 50 to60 then slow down to about 40 then speed back up to50to 60 the car shakes really bad while pushing on the gas paddle. what could be wrong. thanks for your time bad worn

Question about 1997 Intrepid

3 Answers

...to do that they should tell you if you need to replace any worn out steering parts. sounds like the allignment is out of spec... the tores could be "toed out" or the camber could be off. i would get ...

Question about 1997 Dakota

1 Answer

Alignment problem I just had new tires put on my truck (153,000 miles) and had them check the allignment while it was there because my old tires were wearing like it was out of alignment. I wont bore ...

allignment pulls to the right while driving Check the tire pressure and both front tires and make sure they are near equal. Front end steering components could be bad or out of alignment especially if

07 charger steering wheel don't lock in park There are pins in the column that get bent and broke. Open up column, identify them and. Heck for damage. If you've also had symptoms of shifter not ...

...the computer or something? you need a proper scan tool and do a crankshaft camshaft corellation

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...