Questions & Answers for: 3Com ap code

Question about U.S. Robotics Wireless Turbo Multi-Function Access Point 802.11g/b

NO IP or MAC displayed

...When opening the configuration utility, IP and MAC are displayed with zero's (0). So every adaptation of the standard settings is impossible as is access to the web-browser page. Other

Question about OfficeConnect 802.11g/b Wireless Access Point

1 Answer

3crgpoe10075 status led blinking with no stop

...in a non described way. At some point the STATUS led was blinking some seconds and then the AP was working - after some time - and after powring the device it starts to blink [ status led ] ...

Question about OfficeConnect 802.11g/b Wireless Access Point

1 Answer

...I connect by serial cable to console port, I can see it reboting and these problem show: after: AP software 4.0.0.140 ---panic: trapmon detected a fatal error. I have the same problem. You have ...

Question about OfficeConnect Wireless 11g Cable/DSL Gateway Router (3crwe754g72-a-uk)

1 Answer

3com Router and Panasonic BLC30 wireless camera

...camera to connect with out disabling the wpa? Thanks The solution I used was. I had a second router/ap that was wireless. I then associated the #2 router/ap to the WPA main router, And ran the Camera ...

Question about OfficeConnect (3CRWE454G75) 802.11b/g Wireless Access Point

1 Answer

I have 2 3COM 3CRWE454G75 -> AP, it does work in AP repeater mode

...AP mode. Both APs have the same SSID, channel, security mode, encryption code, loaded the latest firmware and reset/power up both APs. Still does not work. What am I doing wrong? find the ip address ...

Question about Wireless LAN Managed Access Point 2750 IEEE 802.11a/b/g 54 Wireless Access Point (3CRWX275075AFT)

1 Answer

We have an industrial setting. We're using RF

...connection when the device gets out of range of one access point and tries to pick up the next AP, even if the device is directly under the second AP. After a couple of seconds, the new AP is ...

Question about 7760 (3CRWE776075US) 802.11a/b/g Wireless Access Point

2 Answers

Reset 3Com 7760 802.11a/b/g.

reset 3Com 7760 802.11a/b/g. but still cannot see wirelless network connection . I press reset buton for 1 minit. Problem not solve upgrade the firmware and reconfigure it Hi, you need to connect to ...

Question about AP 9552 DUAL RADIO 11N WX 30005000 SERIES MANAGED AP (3CRWE9552A75)

1 Answer

Were is the way to

were is the way to the 2 badge well Bicycle

Question about AP2750 802.11a, 802.11g/b (3CRWX275075A) Wireless Access Point

1 Answer

Password and user access point

password and user access point ap 2750 Default Settings for accessing the AP as admin: Default Username / UserID: (leave blank, try admin if prompted) Default Password: admin (lowercase only) Default ...

Question about Wireless LAN Access Point 7250 802.11g/b (3crwe725075a-uk)

1 Answer

3com AP 7250 - how do i reset it to factory defaults if i don't have the admin password ?

3com AP 7250 - how do i reset it to factory defaults if i don't have the admin password ? 3com AP 7250 - how do i reset it to factory defaults if i don't have the admin password ? It will ...