Questions & Answers for: auto command Tablets & eReaders

auto-learning command, it didn't work. So, I tried to run the batter completely down and re-charge it. Neither solution worked. So I tried the smart battery auto-learning command again and it has been

command prompt, you can do this by selecting start then run, type in 'cmd' and enter. (The screen above is in German Sorry, but you will get the point) You will see a windows that pops open, it should

auto lock at the specified time interval. imthemobile guru first answer is right and to generalize these devices run and alter their states based on programming or programs running a do not dim screen

...the commands back. Triple tap anywhere on the page and the brightness control should show. Uncheck auto if it's checked and move the slider to the right. If that doesn't work you will have to ...

...auto reset from default software if it does not work then you need to download the correct motherboard firmware or software and format the usb fat32 and copy into it firmware files are avalable below ...