Questions & Answers for: Kenmore benjamin Computers & Internet

trying to remove front of model 2272 kenmore washing machine how do you get the front off Hi, the outer panel should be one big piece and can be removed by taking off all of the bolts on the back and ...

Won't heat Sounds like the magnetron has failed. This is the component that produces the microwave that heats the food. The cost of the magnetron is about 95% of the cost of a microwave . Most people ...

cooking how to cook with the galaxy microwave You just place in the food product into a non metallic bowl and set the timer and press start. Not sure what else you are wanting to know. Let me know how

the dryer runs but only blows cold air. It's a gas dryer. Kenmore 90 series Have you checked the igniter yet or tried replacing it? It is generally the first thing to go when this happens. Benjamin

the lever that you depress with a glass to get ice cubes is broke i have tried several times to glue or epoxy the lever and it continues to break. do you have a solution? thank you You could just ...

my microwave stop heating The magnetron (the part that heats the food) may be bad or the circuitry to the magnetron may have burned out. Basically my advice is that if you have no electrical expertise

Suddenly it does not work. Can I get a make and model of the unit in question and any more detailed descriptions of the problem or things that you were doing before it stopped working. Anything at all

OVEN WILL NOT HEAT, BOTTOM ELEMENT NOT WORKING Well, to ensure the element is bad, you can take an ohm meter to the contacts of it and measure the resistance. It should be around 20 ohms. If it is ...

I Have A self cleaning stove Kenmore.When i want to clean and lock the door it will not start the cycle it shows door.? There is a bad connection on the door lock to the sensor that detects whether ...

Ice forming on the panel on the back wall and temps 40-44 on the top shelf but freezing on the bottom shelf Improper air flow is your problem, Defrost it first. Then make sure that the fan inside is ...