Questions & Answers for: Gaggenau burner knobs Home

...if it keeps on clicking it could mean that one of the switches shorted out and will need to be replaced. The switches are located under the burner control knobs on the valve. Hope this helps. ...

flame too low After accidentally pouring some water on the cooktop,the flame on one of the burners has become low.I tried to adjust the screw next to the control knob but no change.Any advice would be

I rented the house to some men who would bang on my appliances. It looks like the gas valve for FR burner has to be replaced. Very unusual for Gaggenau gas cooktops

ignition problems When the left hand rear burner is turned on the ingnition does not stop firing. Also the rear left and front left burners do not stay on ie gas stops as the knob is released. I am ...

When lighting one of the burners, the ingnition knob has to be held down over ten seconds for the flame to stay lit when the knob is released.. One of my gas burners will light when the starter knob ...

When lighting one of the burners, the ingnition knob has to be held down over ten seconds for the flame to stay lit when the knob is released.. One of my gas burners will light when the starter knob ...

...burner knobs all 4 not able to turn Hello, Just to be clear, non of the 4 burner controls/knobs will turn ? You are familiar with this unit are you ? Typically you must push down and turn to activate ...

...burner 36" gaggenau has stopped working. I checked - the gas is on in the building. But the stove is suddenly dead - nothing happens when I turn the knobs. Hello. What the problem is a part in ...

no flame touching thermocouple On the wok burner (big one front left), there is a outer flame and an inner flame. The inner flame is the one that heats the thermocouple, to allow the burner to stay ...