Questions & Answers for: Brinkmann burner knobs

Front of burner will not light The back of the burner has flame, but not the front of the burner. If I depress the on-off knob, the front of the burner lights, but goes out when I release the knob. ??

...========================. 1). Did you push the igniter for 3-5 seconds after you turned on the Sear Burner (remember, this needs to be done AFTER you've turned the control knob to HIGH). 2). Once the ...

After Release of Knob i have a brinkmann 8501 with left side searing unit and right side additional burner... everything works great except for the searing unit that will not stay lit once i let go of

the sear side burner on my new brinkman grill with... The sear side burner on my new brinkman grill with led lights will not stay lit after doing the proper set up like holding the knob in for 30 sec ...

...or hose. If you are only smelling gas with the knobs on, it's possible you have a clogged burner or orifice from bug nests, spiderwebs, etc and need to clean it out first. Hope this helps. ...

...knobs on it almost eliminates the falme from all the first burner and has no flame on the other two burners. help i am craving a grilled burger. paul Hi, That would be a regulator problem, assuming ...

I have a Brinkmann with a side burner. It does not start up using the control knob, but I can match light it so the gas supply is good. What's the problem ? hello chaak... check to see if when you

What is the secret in removing the knobs on a brinkmann 810-6805s If the knobs do not pull of, check the bottom of the knob for a hole where you can insert an allen key to undo the set screw. If the ...

I have a 3 knob grand gourmet grill with a newer burner, I light the grill with the first knob, turn on the second knob, turn on the third knob and the flame goes out, any suggestions? To troubleshoot

burner wont stay lit on my grill. I can get it lit but it wont stay on I had the same problem and I found that if I tightened the thermocouple line on the back of the smoker control knob it would work