Question about KESC307 Electric Kitchen Range
...burner not working right 2 burners not working right. Sometimes they work. but have no idea what temp they are on and have trouble turning them off. Have tried changing out knobs and tightened the ...
...burner knobs? when the control panel is locked are the burner knobs still "live" for child safety i would prefer not hi, Unfortunately if they are knobs they may still be "live" when the panel is ...
Dead burner on kitchenaid gas cooktop? I've got a KitchenAid KGCT305BBL 4 burner gas-on-glass cooktop and the left front burner has stopped working completely. The other three work fine. This one does
Question about 32 in. KECC502 Electric Cooktop
Kitchenaid KECC502 Electric Cooktop: LED light at the left rear knob is always on but the left rear burner single or dual does not work. I tried to turn knob on and off but nothing enable burner. I ...
...burner knobs and point the dryer into each burner knob stem to get the heat in there and dry out the switches. Once the liquid has dried then you should be able to plug the range back in and it will ...
Question about KESC307 Electric Kitchen Range
...knobs all activate the spark. I have been turning the gas on to the front right burner and then activating the rear right knob to light both and then turning off the rear one. Is it the Spark switch ...
RE my KitchenAid Gas 4 burner stove top Model kgct365x All of the sudden all four four burners stopped sparking. I'm guessing this is the spark module, Harper-Wyman 6540 (120VAC, 60 Hz, 8mA) Any other
KitchenAid gas stove main burner igniter does not work when the control knob is turned to the ignite position; however when any one of the other burners control knob is turned to the ignite position, ...
Question about KERS807SSS Electric Kitchen Range
...help/advise/direction regarding my predicament.Thanks,Dan Either the knob has gone out or the burner element. I would test the knob first to see if there is current when turned to the large
Question about KERS807SSS Electric Kitchen Range
...knobs. When I push the knob in to start the burner, at times the light for the burner and burner do not come on. You have a bad control, also called an infinte switch, that needs to be
Usually answered in minutes!
2,518 Questions
1,056 Questions
713 Questions
416 Questions
354 Questions
