Questions & Answers for: Polycom IP dial block

for incoming calls, the caller cannot hear me for 2-10 seconds after I pick up I have only experienced this problem with the Polycom 501 IP phone. I can make calls just fine, and I can recieve calls ...

...I just connected. The phone shows the phone number and goes through the set-up, but doesn't have a dial tone. This in it's most basic description means that the phone is unable to register with the ...

Polcom phones stop ringing Hi All, we have various model Polycom phones (500, 501, 601) connected to our Switchvox (Asterrisk based) server and they all stop ringing over time when receiving outside ...

...do not work - they were not stored properly and seemed to have suffered some damage. One has no dial tone, One is very noisy when you press for a dial tone One was plugged into an incorrect power ...

have a dial tone but cannot ring out or receive calls It seems that you have set it to silent ring to change this go to menu --> settings --> basic --> ringtype --> and select low trill or

...I have checked all connections - I still can get calls to come into the phone but there is no dial tone for me to call out. Are you using this as a stand alone unit or configured for an

I have a Polycom SoundPoint 331 phone and accidentally turned on my outgoing caller ID block by dialing #65. How can I turn this off, so my number is visible to the people I am calling? I accidentally

I have 25 SIP lines my question is, Why sip phone delay dial to IP phone in 4 to 5 seconds? But, if I used auto dial feature on SIP Phone, IP Phone ringing immediately dial plan.... try pushing # ...