Questions & Answers for: Dodge how do i fix my tower Home

...fix your problem. The wires are color coded so if you feel you can do it yourself it will save you money. The resister is located under the hood on the firewall right next to the shock tower. As you ...

FIX YA If you actually had to have the strut tower replaced it would be something a body shop would need to do and is no small job. Have a body shop take a look and advise on how safe it appears to be

...fix the dashboard light? They don't turn on at all and haven't sense i've had it. Is there a fuse i can just change? check fuse its behind the glove box door.you another set of fuses in the power ...

...to change? Mine was put on a computer and we were told it was bad. Also, is it necessary to have it fixed? Thanks so much, Laura Good day The location is near the strut tower passenger's side there ...

...fix, my starter relay was bad on 95 dodge spirit your info told me exactly where it was and what to do [ it is located on the driver side strut tower there are two cube shaped relays the closest one ...

fix the catlystic convertible but still having problem with the van backfiring if its a 3.3l or a 3.8l and its making a little clicking noise when you rev it up then you probably have a broken rocker ...

...we are misfiring on cylinder 2. Where is cylinder 2 located and will replacing the plugs and wires fix the problem? Cylinder number 2 is on the front of the engine on the passenger side. If there

...wheel mount under the hood on the front left side is rusting through and cracking. Is this problem fixable or should I get rid of the car. You mean the strut tower sheet metal? Your not going to be ...

Engine misfires. Battery dead/fixed. Po303 code: Changed plugs/wires, code cleared/reappeared. Misfiring again. Po420 code/then cleared. Po306 code. Replaced coil tower. Misfired again.. You either ...

...fix my timing I installed a new timing chain on my 96 dodge ram,with a 5.2 actually had to do it twice now for it to start I have to hold down my gas pedal and when I popped the distributor off rotor ...