...Fly. When button pushed the 4x4 indicator light keeps flashing. Same problem in 4x4 high & 4x4 low. Transfer case engages but front axle does not. Could it be the Actuator solenoid on the front ...
...fly button s on the dash for 4 wheel drive the light keeps flashing but after 2 or 3 flashes it is suppose to stop. It seem like the 4 wheel drive isn't fully engaging. If the light is continuing to ...
...button 4 wheel drive shift on the fly. The lights were all blinking then it would go into 4 low and now it won't do anything at all. I really need my four wheel drive and am on a very limited budget. ...
fly but shifting to 4wL has to be done stoped and while in neutral. Try that. Otherwise I'm afraid its a new computer for you. Its located under the left rear seat and you need a loan for one. put the
Question about 2004 Sierra 1500 Crew Cab
the four drive servicer light came on the dash..It won't go into 4 wheel high... sounds like you need to have the push button on the fly system checked out, might need replacement.
4 wd will not release front axels of 4 wd will not release after on the fly button is changed back to 2 wd remove the solenoid at the front axle and grease.
...button on top over top of the cable. This is a ratchet action cable adjustment, when depressed the cable will fly back into the housing. Then the cable is adjusted automatically by the transmission ...
Question about 1988 S-15
...fly wheel hard someone said something about it being shemed wrong starter was cracked changed out would crank changed plugs, plug wires, new distributor, rotor cap, button, still wil What is causing ...
Question about 1997 Jimmy
BUTTON FOR 4 LOW I CAN HEAR IT GO INTO LOW GEAR BUT IT WILL NOT BE IN 4 WHEEL DRIVE NO SHAFTS SEEM TO BE BROKEN. COULD THIS BE A CASE OF THE ACTUATOR BEING DAMAGED BY TAKEN IT OUT OF 4X4 AT TO HIGH OF
Usually answered in minutes!
29 Questions
23 Questions
2 Questions
14 Questions
