Questions & Answers for: OKI form alignment Computers & Internet

...alignment We have several Oki 320's that seem to lose TOF while printing. If we reset TOF the first page prints correctly, but each page that follows starts printing higher on the page. The form ...

...form feed as you power on the printer, makes it print a test page? I have also changed the print ribbon. If your print fades in then out every 5-6 lines, your platen probably has flat spots on it. ...

...alignment I am trying to print single column continuos form lables (Avery 4013) using MS Word label printing option on the 320 turbo and the printer head will only start printing toward the center of ...

...form feed button a few times. Watch the printer’s tractor feeds to make sure they are moving and are in synch with each other. Some printers use belts to move the tractor feeds and, over time, these ...

...faster and easier to alter your program's printing function. Check that you are using the correct form template, and either delete one line from your data, The program may be issuing a line feed,

how to install paper in oki microline 320 turbo printer Paper Loading Rear Feed, Continuous Forms Use the rear-feed path for printing on single-thickness, continuous-form paper. Use the single-sheet ...

Printer does not print the upper part of anything being printed There may be two things that cause this: a bad/dry ribbon, or a damaged printhead. Take a sheet of paper and print something out and try

...I MAKE THE PAGE ADVANCE AUTOMATICALLY TO THE POSITION I NEED IT TO BE TO TEAR OFF ? Setting Top of Form, Forms Tear-Off ON (Step A) ! If you turn the platen knob when the printer is turned on, you ...

...form is set correctly and is not too close to the top of the page. If it is too close, it may cause the printer to jump around. Check the print head alignment: If the print head is not aligned ...