Questions & Answers for: Biostar function refresh button Computers & Internet

...for BIOS is basic input/output system. The BIOS holds all the information code for the basic functions of the computer and the Hardware without a CD. It is the mainframe software of the ...

SB0460 installed but no sound you just cleck your computer if hte driver is installed,you just right click the my computer, the properties, the click the hardware, then click the device manager, so if

...button not functioning Refresh all the connections to the motherboard and clean the RAM like shown in the image below. If nothing happens, reset the JCMOS1 (highlighted in the image below). Shut down ...

The ATX power supply on my computer went out, so I replaced it with a new one. I connected all the usb and cables in the back, plugged in the power cord and turned on the switch and the mother board ...

Biostar P4M80-M4: USB not functioning properly, "device not recognised" when plug in a printer or handy drive. Still the same even after re-formatting the pc. P4VMA-M VER 7.8 this is hardware problem.

In My mcp6p-m2 ,the was not function properly it does not also work .,what was i should be install for the audio driver? Hi, try this link: ...

Motherboard M7VKS my mother board cpu fan is runing but nothing happen no display no light no function try replacing all the leads that attach to your hard drive including electrical extensions + ...

...the system shutdown automatically after power on system for seconds, that means the CPU protection function has been activated. When the CPU is over heated, the motherboard will shutdown ...

...LED, Power LED, and speaker connection. It allows user to connect the PC case's front panel switch functions. Pin #1 has a black square on the motherboard and the pins are oriented from 1-8, left to ...

not functioning power supply is new but it dosen't power on Hello you can download the manual here: http://www.biostar.com.tw/app/en/mb/introduction.php?S_ID=209#dl If all connections is ok ...