Questions & Answers for: Savin fuser fuse Computers & Internet

...within 5 minutes after switching the copier on. Most likely cause: Heater lamp blown Thermal fuse blown Faulty power supply Bad connection to fuser unit You will need a service technician to fix

...you could follow this you can replace the thermistor. open the right side and the front cove, the fuser is located on top of the OPC carriage unit, push the blue level going to the right side while ...

...unit connection Check the 2 sensors on the left hand side of the copier (as you look at where the fuser is located). These get knocked & moved out of position. SC 548 usually happens when a ...

in and see if it lets you restart your printer. If it comes back up you have a problem with the new fuser you received. Take a few seconds to compare the unit and make sure all looks the same. If it's

How do I reset fuser code on savin 2513 with a sc544. I have checked the fuser lamp thermal fuses etc. From the power source in cable unplugged. The thermistor reads about 390 k ohms at room temp. It ...

fuse, or fuser may have to be reset by getting into service mode, Yellow key 107 red key, now in svc mode. look for tab that says mode. depress and look for code to reset fuse coul be 5810 and depress