Questions & Answers for: Dewalt harm roller

Feeding speed is erratic My DW735 is 3 month old. Recently happened this problem. It looks the feeding rollers turning smoothly, but actual wood piece moving speed is not constant or does not feed at ...

Thanks, Ray I use denatured alcohol to clean the rollers on my Makita, and it doesn't seem to have harmed them over the years, but I do this infrequently. If your rollers are coated with pitch and or

The belt slips off my Belt Sander When I operate my belt sander, the belt rides off. I have engaged the lever to tighten the belt. Is there something else I need to do? All sander will have two ...

Thickness Planer (DW733) leaves fine scratches on wood surface. For yrs. this machine made glass smooth planes on all sorts of wood. Now it leaves fine, parallel scratches from end to end on hard or ...

when I feed the board in it stops then starts again. ever four inches. Leave a little snip in board. I've replaced the belt an the chains on the in feed and out feed still have this problem. Couple of

the self-feed slips on my Dw 734 Planer. I have had the same problem with my planer since it was new. I hate this planer. The way I fixed it was to pull the feed rollers off and put one washer in the ...

dw735 planner thickness Planer wont pull wood through Is it cold in your shop? The rollers won't work if they're cold because the rubber gets stiff. Clean your rollers also with mineral spirits. Hope ...

feed rollers do not turn blade drum does check for broken belt to the feed rollers.

Rollers won’t turn on my 734 Dewalt planet. Belt broke, replaced it and now roller blades won’t turn but knives do Take it to a small appliance repair store.

How to fix feed rollers not turning on dewalt dw 733 planer here is a link copy and paste https://sawmillcreek.org/showthread.php?111567-DeWalt-733-Rollers-stopped-moving ..