function stopes during the green alignment and displays a number 5. From the research I have done tonight it appears that I need new convergence IC's. If you could confirm that I need the IC's I would
Question about 53UDX10B 53" Rear Projection Television
Click...pause pause pause...click...nothing. There's a click as if the TV is turning on...then a few synchronized ticks...then another click and nothing happens. It functioned this weekend for about ...
...ic repair kit I have a great picture that is bowed at the top and bottom. Also, the magic focus no longer works. Any suggestions as to what would cause this? Thanks. Double check your work for errors ...
possible sound card problem? all functions work well except, no sound. all inputs the same, video but no sound check the solder connections on the audio output ICs and also around the external sound ...
...IC's was no where near as difficult as I thought. Thanks in advance for all the info I've found on here!!! Follow the traces on the PC board from the ICs and you should find either pico fuses marked ...
OK I HAD A GUY COME OUT TO FIX MY TV THE COLORS WERE NOT MATCHING UP?SO HE TOOK SOME BOARD OUT AND PUT SOME NEW PARTS!STILL DIDNT WORK??SO HE GOT INTO SOME MAIN SETTINGS AND MADE MY TV INTO A 42''NOW ...
Question about 53UDX10B 53" Rear Projection Television
...function. If red vertical will not adjust, check resistors near the red plug. There are many posts and websites that offer "new and improved Convergence IC substitutes. My advice is to use the ...
...a chriping sound This problems is also parts of tv convergence board have dead 2 STK convergence ICS and some or all the resistors dead too.This problems the 2 STK and some or all it resistors are ...
Question about P50H401 50 in. Plasma HDTV
...remote is messed up. Is there a restore default setting for the remote? No,the tv remote main CPU ic chip it is dead on the remote.Try website like Remotes.com to buy the tv original
...function is OFF, still you do not get sound, either the speakers or the audio output IC of the set is faulty. To make sure about, which one is faulty, connect the TVs audio out sockets at its ...
Usually answered in minutes!
89 Questions
55 Questions
43 Questions
33 Questions