...xp-sp2 and stuck at initial window logo with a ide dvd writer , but when the writer is removed it boot normally .With dvd writer it only starts window in safe mode. try to use normal ide cdrom ...
IDE channel for the bios to see the drives. All this is fine with me and has been working OK for awhile but......now the computer will only boot in safe mode and work normal with both drives connected
...does not work enter BIOS setup utilityand ensure HDD detection mode is either aouto select or IDE depending on your BIOS you may have to look for a setting that allows you to use IDE not SATA or
...IDE enclosure. If the drive is SATA you can use a SATA usb dock or an enclosure. You could try repairing Windows using the repair mode. Tap F8 as Windows starts. You can try booting in safe mode. To ...
Question about ASUS P4S800 Motherboard REV. 2.01 (ASUSP4S800UAYZREV201)
...HAS BEEN DISABLED IN THE CORRESPONDING TYPE MENU" what does this mean. I have a SATA hardrive and a IDE dvd writer if i try to boot windows from my writer will it recognise my sata hardrive I really ...
...IDE Hard DIsk is not damage because i connect to it another system and its work fine. Is my mother board in corrupt state? Sorry for my bad English. Each PATA device (disk-drive or CD/DVD) drive has ...
Question about Gigabyte GA-8I845PE-RZ 845PE chipset 533MHz FSB DDR333 Socket 478 ATX Motherboard with AGP 4x,... (MB47GB8I845P)
...you can find the HDD from the IDE drives menu. I am sure you will. From Boot menu select the NATIVE mode that will activate both the SATA and the IDE channels. Select HDD as second boot device.
Question about Pentium 3 , 450 MHz Pentium III (SL364) Boxed Processor
...see if you can find the HDD from the IDE drives menu. I am sure you will. From Boot menu select the NATIVE mode that will activate both the SATA and the IDE channels. Select HDD as second boot
Question about Pentium III, 800MHz (229725001)
...drives menu. I am sure you will. From Boot menu select the NATIVE mode that will activate both the SATA and the IDE channels. Select HDD as second boot device.I hope the issue will get ...
Question about D915GAV Motherboard
...mode, sata/sata+pata/pata) and master/slave positions on the pata. Is it at all possible with this board to have the system on a sata and the data on a pata disk?to You should put the OS on an IDE ...
Usually answered in minutes!
4,857 Questions
1,171 Questions
1,019 Questions
802 Questions
712 Questions
