Questions & Answers for: HP no init found Computers & Internet

...found the fax routing faxes to the PC. I unplugged the pc cord, went into the menu and changed the setting to not send faxes to pc. but still will not recieve faxes. Checked tofind that the data line ...

...Init. appears on the control-panel display, release the buttons. 5. When prompted, set the language and telecom country/region. 6. Allow the all-in-one to return to Ready before using it. I had this ...

printer startups After I turn on my printer it starts its inital cleaning of the cartridge heads. As it goes through this process there is a louder than normal clicking sound. When it is finished the ...

hp inkjet all in one model 2210 scanner failure when i turn on my hp 2210 it begains the initalization process then i get scanner failure restart the printer in the message window. i have restarted it

...found that if the Jetdirect card goes bad that it will halt the init proccess on the printer. you can find out if the Jetdirect card is working just by typing in the IP address for the embedded web ...

...init to start my scanner.plz help. Maybe the software that was installed is not the correct one for the all in one .So check the HP site once again and see if there is a new link to get your software ...

...Init. release the keys. 5 Allow the product to return to Ready before using the product. If that doesn't work it can be a power related issue, - Make sure it's NOT plugged in to a surge protector.- - ...

...found out on an official HP internet page that the printer setup has to be changed to used #364 when in Europe, and I should contact HP support. Do anyone know how to change the settings of the ...

...INIT IN PRINTER HP 3050 PLS GUIDE HOW TO OVERCOME THIS ISSUE If you have another same model printer, replace this formatter to another working printer check, no message? wait 10 minutes remove ...

...init cycles. I've had this fault myself, If memory serves me right the control panel ( small though it is) we found to be the problem, once replaced the unit the displayed correctly, weirdly all ...