Questions & Answers for: Infinity where is the input selector Computers & Internet

Question about 475A Car Audio Amplifier

3 Answers

...LOC, can anyone tell me the definitive answer. The Infinity website says this"The RCA low-level inputs on the 475a have allow for connection to both a preamp level signal and direct connection to ...

Ad

Question about BassLink II Car Subwoofer

1 Answer

Basslink II problem running off speaker input Hi Just trying to install my new basslink II and have come across a problem. I am using speaker level inputs but am finding Im getting no sound with the ...

Ad

...update: i bypassed the 300w amp on my first ovtr3 with a cs3006 crossover i purchased on ebay. the input wires at the base of the speaker were connected to the input of the crossover, the bass

Question about BASSLINK Car Subwoofer

1 Answer

... If you're using RCA preamp wires to connect your stereo to the Basslink, make sure the remote wire input on the Basslink is solidly connected to the stereo's remote output. If you're using the ...

Question about BASSLINK Car Subwoofer

1 Answer

input (not the preamp level) with the power selector set to "Auto". With the selector switch set to "Auto", I can unplug the speaker inputs from the base unit, and the indicator light still remains on

Question about Overture 2 Speaker

1 Answer

Why does the red light click to green without the speakers on? That system responds to signal input, ie an electrical signal present on the input, in order to turn on the internal amplifier. If it is ...

Question about US-1 Main / Stereo Speaker

1 Answer

...side why are there 2 per speaker You need to run RCA cables from the CD player to the CD or AUX input on your amp / receiver unit. If you have a standalone amp, you need some way to control the ...

My Infinity TSS-1100 subwoofer emits humming noise when I connect an input cable. It even hums when the cable is not connected to my receiver. It is silent when I remove input cable. I opened the amp ...

Question about TSS-1100 System

1 Answer

only one out of 4 channels work on my amp. should i be using the front input aaaannnnd rear input??? Yes, and also check the wiring to your speakers and ensure that there are no bad wires. Generally ...

infinity tss 750 sub-woofer when powered on immediately pulls speaker in and has loud humming. no inputs hooked up, only plugged in to ac power source. The loud humming is the sound of AC mains - ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...