Questions & Answers for: Schiller line plot Computers & Internet

Is Manual available on Line ? I might have one, do you still need it?

...That will solve your problem for printing in AUTOMATIC Mode Finally panicked and called the help line. In my case, I had loaded the paper upside down and rotated 180 degrees. For future reference, ...

...not turn on.Good AC power coming in. Schiller Cardiovit AT-2 Lite.Will not turn on at all.Green "AC line present" indicator beneath "On" button is ON. AC input transformer inside unit has 120 VAC ...

High, I have a Schiller AT-2 light that is printing too lightly suddenly. Hard to read the lower page tracing in particular. Had it 5 years, doing well. Anything to adjust that? hi, Your machines ...

My AT-2 plus EKG suddenly stopped transmitting from the electrodes, i.e. all the leads show flat line. My e-mail is alaronov@mac.com hi, You have to check the patient cable of you machine first. you ...

machine only shows straight lines on screen and print. you either have 1. a defective patient cable, or 2. a defective PC board. The internal problem is very likely the input connector its self, buy ...

the ekg machine light of filter is flickering and when printing only prints one line out of three appears as if no ink AT-1 HI, Here i added a link which will help you to rectify the problem. Its ...

...2 machine. The S Wave is not plotted on paper. The machine expels the paper but without S wave (ecg line). PLEASE, SOME ADVISE Try rebooting the machine 70@;then flush the print head. If it still ...