Questions & Answers for: Hotpoint microswitch Home

...seems there is obviously a leak somewhere and water is gathering in the undertray setting off the

...and run the machine the 'door open' LED flashes. If I then remove the switch and press down on the microswitch on the door switch the machine starts working normally. I have done about 20 washes ...

...it turns out that was where the problem lay. The rocked part was turning but there is a spring and microswitch and that wasn't moving. Hence the machine would not come on. Had to get a new switch ...

...activated in the base of the dishwasher usually caused by a leak, a polystyrene float activates a microswitch which cuts of the water inlet supply I have the same problem in my Dishlex - 150. I ...

...pressed. To switch it off you have to turn the timer to off or switch off at mains. The secondary microswitch controlling the door is shorted. Check the microswitch which is located at the door ...

I have a Hotpoint HSS25GFTA BB. The water is not dispensing. I know the microswitch is making and water is pumping because I disconnected the tube on the bottom of the frezzer door and it squirts ...

...Englishman in SW France, There is likely to be a problem with the 'door closed' sensor/microswitch requiring a service engineer's attention I suggest ;-0( If this has assisted and/or ...

...in the pipe increases, inflating the bellows. As the bellows inflate, they press on and trip a microswitch inside the sensor and cut the power to the water inlet valve, stopping the water